Yes, of course this was the first thing to do! But the reason why I asked was that under every error there was 00-00 (as well as missing words like "faulty, open or short to ground etc."
Anyway here is my experience and how did I manage to fix the errors. At first place I had to perform adaptation using the following three codes "000", "001", "002". After all the processes did finish I checked again for "Fault Codes".
There were three fault codes:
01582 - Signal for Coolant Temperature
30-00 - Open or Short to Plus
00779 - Outside Air Temp Sensor(G17)
30-00 - Open or Short to Plus
00604 - Potentiometer Positioning Motor for Air Flow Flap (G113)
30-10 - Open or Short to Plus - Intermittent
How did I manage to correct them ?
01582 Signal for Coolant temperature is still available as a fault because I couldn't manage to find the reason for it yet.
00779 Outside Air Temp Sensor(G17) Well as I said the previous owner have installed the Climatronic and he has missed to make the wiring and place the sensor (there was not even wiring for it ) So I had to buy sensor and place two wires from the Clima module to the front bumper of the car in order to have the G17 sensor working.
00604 - Potentiometer Positioning Motor for Air Flow Flap (G113) After a lot of reading and searching around I manage to locate and take out the motor, open it and tried to clean it. There is a big possibility that I messed something wile open it but I was careful. Unfortunately I had to replace it.
After the installation of G17 and the replacement of G113 I did delete the faults and everything seems to work good.
Does someone have an idea how I can probably solve:
01582 - Signal for Coolant Temperature
30-00 - Open or Short to Plus?
