Alarm help please

marcdtr · Jan 11, 2016

My alarm is silent!!! Everything else works. Lights flash etc etc I have replaced the siren 3 times and check the battery in it and all looks good. Could it be an ecu fault?
If I need to scan the alarm what do I need to buy???

Thanks

BakPak · Jan 11, 2016

I was glad when I finally removed the chirp box, much more civilized.
Why are you so concerned mate?

marcdtr · Jan 11, 2016

I'm one of those people who like everything to work or know what is the cause . Just spent 3 hours replacing the buttons on the climate control unit cos it looked s**t.

D9n dk · Jan 20, 2016

marcdtr said:
I'm one of those people who like everything to work or know what is the cause . Just spent 3 hours replacing the buttons on the climate control unit cos it looked s**t.

im the same mate, try set the alarm off and see if you have power at the siren you might have a broken wire i can't imagine you have had 3 dodgy sirens

mattyboyc · Jan 20, 2016

Check the switch in the drivers door pocket, I'm sure if this is turned on it silences the alarm if activated. Check in your handbook.
I used to use this when on ferries.

Mike.M · Jan 21, 2016

I would be checking there is power to the siren and the fuses are ok.

Arrkon · Jan 22, 2016

On the three pin connector at the siren, you should have a 12v, Ground and a signal wire. VCDS will also show if there is a communication issue.

Search

Search

Alarm help please

marcdtr

Registered User

BakPak

No Gear

marcdtr

Registered User

D9n dk

Dan Klang

mattyboyc

B6 Veteran now Q5 owner

Mike.M

Registered User

Arrkon

Back in a "B"

Similar threads