Where to buy EGR Delete Kit for 2.0 PD140 TDI 2004? Also should i take cat off as well?

OhSoFresh · Jun 9, 2015

Okay I've got a 2.0 PD140 2004 8P Audi a3 with 120k on the clock, last weekend I put a straight through from the cat removing 2 boxs prepairing for the remap. I know i should do all mods before remap to get a proper reading but can anyone tell me where i get a egr delete kit from... do i just need a plate? and should i take my cat of aswell or leave it on?

Thanks guys

slizza786 · Jun 9, 2015

Just buy a egr blanking plate off eBay stainless steel for like £5 (the one without the small hole in the middle) and then just fit that between the egr valve and inlet manifold connecting pipe.

tdi-man · Jun 9, 2015

http://www.darksidedevelopments.co....e.html?page_context=category&faceted_search=0

http://www.darksidedevelopments.co....0.html?page_context=category&faceted_search=0

remove down pipe and get one without cat

Sayam · Jun 9, 2015

Just blank the EGR off, you don't need to remove it completely.

OhSoFresh · Jun 10, 2015

Yes but don't I need to take that rubber vacume off too?

slizza786 · Jun 10, 2015

Take off the two bolts that are holding the pipe to the valve then give a little pull on the pipe and get someone to hold it to leave a gap which is when you will fit in your slot in blanking plate between the gasket and the pipe. After that release the pipes and bolt back in the bolts. When you remove the pipe from the valve be careful not to drop the gasket get down the engine bay

slizza786 · Jun 10, 2015

Your engine light will eventually come on so you will need a remap to go a egrOff

OhSoFresh · Jun 10, 2015

Thanks guys will any cheap plate fit from eBay or do I need to measure it? Didn't know it be that easy aha

slizza786 · Jun 10, 2015

OhSoFresh said:
Thanks guys will any cheap plate fit from eBay or do I need to measure it? Didn't know it be that easy aha

http://pages.ebay.com/link/?nav=item.view&id=131090837273&alt=web

You have the same car as me and I did this a few weeks ago. I actually saw the mpg improve a bit. Its as **** as pie to do

SAiLO · Aug 2, 2015

slizza786 said:
Just buy a egr blanking plate off eBay stainless steel for like £5 (the one without the small hole in the middle) and then just fit that between the egr valve and inlet manifold connecting pipe.

Do you fit the blanking plate between EGR and exhaust pipe that comes from the right? Or is it meant to go between EGR valve and inlet manifold?

slizza786 · Aug 2, 2015

Between the egr valve and inlet manifold pipe. Make sure the I gasket doesn't fall down when you move the pipe and the gasket has to be on the side of the valve. So in order it'll be from left to right (bkd engine): egr valve > gasket > blanking plate > inlet manifold pipe

SAiLO · Aug 2, 2015

slizza786 said:
Between the egr valve and inlet manifold pipe. Make sure the I gasket doesn't fall down when you move the pipe and the gasket has to be on the side of the valve. So in order it'll be from left to right (bkd engine): egr valve > gasket > blanking plate > inlet manifold pipe

Thanks. So is it the pipe that attaches to EGR from the right on the image? Apologies, I just want to be 100% sure.

http://i35.tinypic.com/2lk8bwn.jpg

Rideen · Aug 2, 2015

SAiLO said:
Thanks. So is it the pipe that attaches to EGR from the right on the image? Apologies, I just want to be 100% sure.

http://i35.tinypic.com/2lk8bwn.jpg

Yep.

slizza786 · Aug 2, 2015

SAiLO · Aug 2, 2015

Many thanks both!

Search

Search

Where to buy EGR Delete Kit for 2.0 PD140 TDI 2004? Also should i take cat off as well?

OhSoFresh

Registered User

slizza786

Active Member

tdi-man

Registered User

Sayam

Well-Known Member

OhSoFresh

Registered User

slizza786

Active Member

slizza786

Active Member

OhSoFresh

Registered User

slizza786

Active Member

SAiLO

Well-Known Member

slizza786

Active Member

SAiLO

Well-Known Member

Rideen

Registered User

slizza786

Active Member

SAiLO

Well-Known Member

Similar threads