Im trying to fit LED's for my number plate, but the bulbs don't seem to work, I'v had a scan on the internets to find out why and it seems i need to attach resistors, but unsure which 'Ohm' resistor's i need, can anyone help?
Q7 LED Bulb not working
- Thread starter keepinitcriss
- Start date
You can buy the genuine Audi led number plate lights for about £30 or less.
All you do is unscrew the cover, remove the bulb then the led unit just slots in and you screw in.
http://www.ebay.co.uk/itm/Audi-Q7-2...886?pt=LH_DefaultDomain_3&hash=item3cfee69846 there you go, no problems and no errors.
All you do is unscrew the cover, remove the bulb then the led unit just slots in and you screw in.
http://www.ebay.co.uk/itm/Audi-Q7-2...886?pt=LH_DefaultDomain_3&hash=item3cfee69846 there you go, no problems and no errors.
g3gsb
Registered User
- Joined
- Apr 5, 2015
- Messages
- 47
- Reaction score
- 1
- Points
- 8
I bought some from eBay with built in resistors. Dirt cheap and have been great for the past few months. I have to slightly prize the attachment side connectors on the car slightly so that they didn't fall out but apart from that they are perfect. I'll see if I can find the link for you.
g3gsb
Registered User
- Joined
- Apr 5, 2015
- Messages
- 47
- Reaction score
- 1
- Points
- 8
These are the ones I bought
http://pages.ebay.com/link/?nav=item.view&alt=web&id=180864504400&globalID=EBAY-GB
http://pages.ebay.com/link/?nav=item.view&alt=web&id=180864504400&globalID=EBAY-GB
