Post pics of your B7 A4/S4!

One from the weekend also.
ivKlolvgAlT7rAqVBG8XSoyvqGgBoobscdzBY-mYSjE=w600-h400-no
 
  • Like
Reactions: THQuattro
Decided to give the cab a quick wax last night ready for the east meet today
Image
Image
 
  • Like
Reactions: THQuattro
Looking sweet Dimi!!! A wee carbon boot lid spoiler would just finish it off a treat and please lower it, just a wee bit?!?!

More colour coordinating,

 
  • Like
Reactions: THQuattro, Bigmac81, Greeny233 and 3 others

Attachments

  • 20150712_095712a.jpg
    20150712_095712a.jpg
    971.2 KB · Views: 257
  • 20150712_172935a.jpg
    20150712_172935a.jpg
    713.6 KB · Views: 249
  • 20150712_173240a.jpg
    20150712_173240a.jpg
    836.6 KB · Views: 225
  • 20150712_173604a.jpg
    20150712_173604a.jpg
    773 KB · Views: 232
  • 20150712_174052a.jpg
    20150712_174052a.jpg
    952 KB · Views: 241
  • 20150712_173526.jpg
    20150712_173526.jpg
    916.4 KB · Views: 222
  • 20150712_173446.jpg
    20150712_173446.jpg
    955.2 KB · Views: 219
  • Like
Reactions: benlee, Marc B7 and slepy
Thanks. I've got to do a write up and post pics of @t8ups installing the projectors. And then my 2 week long effort of removing the bumper and fitting the grille etc (first time attempting such a thing myself!)

thanks for the info on the wheels and the encouragement!
 
umuk said:
Thanks. I've got to do a write up and post pics of @t8ups installing the projectors. And then my 2 week long effort of removing the bumper and fitting the grille etc (first time attempting such a thing myself!)

thanks for the info on the wheels and the encouragement!
Click to expand...

Looking good, and oh so shiny :8ball: :wub:


The Cupra lip needs looks like it needs a little sorting out in the middle and is an easy fix once the bumper is off.

Whilst my bumper was off I used stainless steel allen bolts, stainless washers and stainless nylock nuts to hold my lip on.
To get mine straight and level in the middle I cut the 2 lip struts to the correct length/angle.
I then inserted a long piece of black rigid fibreglass kick board (plastic would also be ok) inside the bumper above where the 2 struts are located.
The fibre/plastic being approx 4mm thick and running the whole length of the bottom of the grill.
The plastic acts as a strengthener for the floppy bumper bottom.
I then used longer stainless allen bolts and large stainless washers through each lip strut to hold them tightly to the underside of the now more rigid bumper. The large washer on the lip strut bolt stops it pulling through the strut ;)

See here... http://www.audi-sport.net/xf/threads/post-pics-of-your-b7-a4-s4.21579/page-35#post-2505081

and here... https://farm1.staticflickr.com/488/19447343945_85832f87d5_b.jpg


Hope that helps.
 
  • Like
Reactions: umuk
audi upgrades
1d9149af1e6ab3aec87c4aba04df9840.jpg
noch tiefer
 
  • Like
Reactions: benlee, umuk, dimitar.tuntov.5 and 1 other person
K-1 said:
1d9149af1e6ab3aec87c4aba04df9840.jpg
noch tiefer
Click to expand...

i think there is a slight design difference between the 'proper' rs6 alloys to those that were fitted to the a8...i know the et is 35 and 44 respectively but yours seem to 'dip' in the middle slightly whereas mine dont.
 
Marc B7 said:
Looking good, and oh so shiny :8ball: :wub:


The Cupra lip needs looks like it needs a little sorting out in the middle and is an easy fix once the bumper is off.

Whilst my bumper was off I used stainless steel allen bolts, stainless washers and stainless nylock nuts to hold my lip on.
To get mine straight and level in the middle I cut the 2 lip struts to the correct length/angle.
I then inserted a long piece of black rigid fibreglass kick board (plastic would also be ok) inside the bumper above where the 2 struts are located.
The fibre/plastic being approx 4mm thick and running the whole length of the bottom of the grill.
The plastic acts as a strengthener for the floppy bumper bottom.
I then used longer stainless allen bolts and large stainless washers through each lip strut to hold them tightly to the underside of the now more rigid bumper. The large washer on the lip strut bolt stops it pulling through the strut ;)

See here... http://www.audi-sport.net/xf/threads/post-pics-of-your-b7-a4-s4.21579/page-35#post-2505081

and here... https://farm1.staticflickr.com/488/19447343945_85832f87d5_b.jpg


Hope that helps.
Click to expand...


thatnks for that...but tbh i dont think im going to be taking off the bumper any time soon! im no diy'er and that was perfectly evident over the past 2 weeks. im just glad i managed to get it back together again.

what i will try and do it cut the middle struts down by about 10mm to make it sit more flush.
 
  • Like
Reactions: Marc B7
Here's my new A4 Quattro TDi in Dolphin Grey...Love the colour, It looks a much darker grey in real life, but when the sun hits it, looks a lovely dolphin blue colour. Really enjoying the car so far :)

2015 07 06 074441
2015 07 06 074353
 
  • Like
Reactions: Griffin1989, Marc B7 and slepy
Back to standard wheels and a good polish

IMG_7733_zpsfbavp41z.jpg


IMG_7734_zpsjsr1qjoi.jpg


IMG_7736_zpsruktaw2v.jpg
 
  • Like
Reactions: umuk, Griffin1989 and dimitar.tuntov.5
Rollin' countryside
 

Attachments

  • IMG_4099.jpg
    IMG_4099.jpg
    1.8 MB · Views: 190
2.0tfsi Quattro
 

Attachments

  • image.jpg
    image.jpg
    863.6 KB · Views: 173
  • image.jpg
    image.jpg
    245.5 KB · Views: 171
Ajax...I think the suspension needs looking at...seems to be missing :tonguewink:
 
  • Like
Reactions: slepy
You must log in or register to reply here.

Similar threads

Charlie Farley
  • Sticky
Post pics of your B7 A4/S4 Avant, the more the merrier.....
Replies
579
Views
104K
Charlie Farley
Charlie Farley
R
Interior Pics of B7 S4
Replies
17
Views
3K
gizze
gizze
Av4nt
B7 A4 --> S4 Replica with pics!
Replies
40
Views
6K
PetrolDave
PetrolDave
Triple.O.G
Pics of your coilovers fitted
Replies
27
Views
2K
Triple.O.G
Triple.O.G
M
Pics of your wheels (sticky perhaps?)
Replies
68
Views
22K
rookie
R
Top
Back