Rs4 avant rear lower valance

Hi m8, I did what your thinking of doing, you can check out the photos in the gallery section under RS4 Cookie, there are two albums there...one for the RS4 that I have now and the other for my previous car 3.0 tdi S-line saloon The good news is that it does fit with a bit of work, the bad news is you have to get your hands on a second hand RS4 rear bumper as the part in question is moulded as part of the bumper and has to be cut from the original bumper..The only parts Audi sell are the complete bumper or the plastic mesh infill. The rear bumper I got was from an 07 avant. and cost £160... A five inch angle grinder with a cutting disc would be your best bet as you will also have to cut away part of your own bumper. Measure, Mark and Cut very carefully as any "slips" could prove costly, the bumper should be removed before starting on it. Hope this helps you out..