1.8T downpipe

eastside_valver

eastside_valver

Registered User
Joined
Jul 11, 2006
Messages
47
Reaction score
0
Points
6
Location
Aberdeen
Does anyone know if a Milltek downpipe can be fitted with a standard system?
or
Does anybody else make a "performance" downpipe for a 1.8T A4 B5?
 
I would have thought it would be a larger bore size but you might be able to use a reducing sleeve.
 
Thats good if they do!!

I caught my exhaust on a ramp ages ago and it stretched the flexi pipe out and now is blowing a little bit.
 
Milltek say no.
They will not supply a downpipe on it's own.
I was hoping to change the downpipe now (I need one anyway) & the rest of the system early next year.
I'll try my local supplier tomorrow.
 
I cant see them splitting the system, as the centre section is priced on its own to but i think it has to come with a backbox.

Worth a try though!!
 
what downpipe? B5 avant 1.8t is a longtudinal engine, turbo bolts straight to the cat and then to the front pipe section. wasn't aware of any traditional downpipe.....as it runs straight back and not down like a transverse unit..
 
audi upgrades
You can buy the downpipe separately, I did. As mentioned above, CAT bolts directly to turbo, then there is the downpipe, then the rest of the system.

When I first got my system I had it without the downpipe so a reducer was used to couple the two together... I removed it when I fitted the downpipe as the two Milltek parts obviously just slot straight together.

Centre sections are listed separately too because there are usually two different types... resonated and non-resonated.

Rich (RichA3Turbo) can get Milltek parts if you ask nicely :biggrin:
 
You must log in or register to reply here.

Similar threads

NineNails
1.8t Downpipe
Replies
3
Views
1K
Broken Byzan
Broken Byzan
olds_kool
1.8t downpipe ?
Replies
3
Views
1K
aragorn
A
a4singh
1.8T Downpipe?
Replies
2
Views
1K
a4singh
a4singh
I
Downpipe/flexi?
Replies
7
Views
1K
ian52
I
gaz71
2.5" downpipe
Replies
2
Views
1K
jamie226bhp
jamie226bhp
Top
Back