Hi can someone please share the correct brake bleeding sequence including the abs pump via vagcom please.
Will be using pressure bleeder.
S3 8l. Limbo.
Will be using pressure bleeder.
S3 8l. Limbo.
For anyone reading this. Never manually bleed these cars with your mate pumping the pedal.
Not unless you fancy near enough taking your engine out to replace the servo.
ok, was going to have a go at this on the weekend. It's not possible without vagcom then? As was just going to manually bleed them, like on any other car i've done them on before.
Don't manually bleed them. Use a pressure bleed or a suction bleed. Not unless you fancy potentially destroying the seals in your brake servo. Youll need to drop the engine 6 or so inches to be able to get the servo out if it needs changing.
In most cases the ABS bleed is not necessary. Do the four bleed nipples on the calipers. 11mm and the two on top of the master cylinder both 7mm.
some say its a myth but ive had my servo replaced because of this