SDHA4SLine
Registered User
My rear springs/shocks must be pretty worn then as they sit lower than yours on 18's
Pics of your wheels (sticky perhaps?)
- Thread starter Mark-f
- Start date
- Joined
- May 5, 2015
- Messages
- 39
- Reaction score
- 0
- Points
- 6
good mate, had a couple of audi,s since the honda but like you say i miss that engine!!!
tony mc
Registered User
lmao yeh me too, i've cut my rev range from nearly 9000 rpm to nearly 4500rpm lol, was a big change for me mate i tell you.
@SDHA4SLine have you checked the rear as mine was like that when i got it last year and it had snapped springs in the rear
SDHA4SLine
Registered User
Yes had them checked twice as that's what I thought had happened. I may get them checked again to be safelmao yeh me too, i've cut my rev range from nearly 9000 rpm to nearly 4500rpm lol, was a big change for me mate i tell you.
@SDHA4SLine have you checked the rear as mine was like that when i got it last year and it had snapped springs in the rear
think this is the best shot I have atm.
Love the vents on the front bumper - how did you do that????
Dtm I think
What size are those rotors?
They look good on the black avant, but I'm loving the OZs more. I'm thinking of sticking with 18s for 2 reasons; I have brand new contis all round, and ride comfort. Thoughts?
What size are those rotors?
They look good on the black avant, but I'm loving the OZs more. I'm thinking of sticking with 18s for 2 reasons; I have brand new contis all round, and ride comfort. Thoughts?
Yes they really set the car off, Iv always liked the rotors and had to buy the black ones when I seen them. I got the 19's, with spacers on the front. They rub the fenders only slightly when I have full load in the back over bumps but I did do wide.
If it were me, sell on your rims with new tyres or part ex for 19 or 20.
If it were me, sell on your rims with new tyres or part ex for 19 or 20.
Nobody in their right mind is going to pay a wedge for 18" Avus with very good tyres. I didn't buy the tyres, there's a receipt for £1300 for 5 conti sports from about 6 months ago (ok, not brand new, but ~7mm on 4)
DTM 18x8J ET ?
245/40/18
Bentleys 19x9J ET42
215/35/19
TTRS 19x8.5J ET52 (needed 5mm spacers all round)
215/35/19 F
235/35/19 R
Rotors 19x8.5J ET43 (18mm spacers at the rear)
215/35/19
HRE 19x9.5J ET40
235/35/19
245/40/18
Bentleys 19x9J ET42
215/35/19
TTRS 19x8.5J ET52 (needed 5mm spacers all round)
215/35/19 F
235/35/19 R
Rotors 19x8.5J ET43 (18mm spacers at the rear)
215/35/19
HRE 19x9.5J ET40
235/35/19
I'm thinking to install same wheels but only 18" did you do some "surgery" on something or just "plug-in & play"? Any spacers?Mine on 19" OEMS 115 8.5 front 9.5 rear deep concave....
SDHA4SLine
Registered User
Yet more wheels - I do this so you guys don't have to. It's a service I provide fro the forum !
This time they come in the form of RH Crossline AN (3 piece splits)
Rears 19x10J ET49 - 5mm spacer to clear strut. Final ET44. Tyres: 225/35/19
Fronts 19x8.5J ET43 Tyres: 215/35/19 I will be getting spacers up front eventually or maybe building the wheels wider.
This time they come in the form of RH Crossline AN (3 piece splits)
Rears 19x10J ET49 - 5mm spacer to clear strut. Final ET44. Tyres: 225/35/19
Fronts 19x8.5J ET43 Tyres: 215/35/19 I will be getting spacers up front eventually or maybe building the wheels wider.
Similar threads
