A3Q toy

F4B UP

to old to care
Joined
Apr 27, 2015
Messages
18
Reaction score
5
Points
3
Location
norway recently
So I got out of performance cars a few years ago after a very long line culminating in a 360 hp mk5 gti dsg.

Family and work meant I changed tack and gave it up.

BUT! It never really leaves you. So I was considering a toy when I chanced across this

CIMG6375 1
CIMG6377 1
I had the funds and it had the right bits on it for me whilst being a useable car. So I bought it. Ran it for 2 days then tracked it at combe where it died. It got trailered to bills aka Badger5 for a diagnosis!

****** was the reply:(

So to cut a long story short it went in for a turbo rebuild and came out with a new spec turbo, manifold,valves,dp etc etc etc!
 
Last edited:
  • Like
Reactions: Gops
Very much so. Decided to run it to the airport this morning. On actuator pressure it's fun! Took the wife out yesterday, she swore at me!
 
Is this the one with red 996T brakes that I've seen a few times?

Looked very nice when I saw it if so :)
 
  • Like
Reactions: F4B UP
How did you do the cut outs in the lower bumper? looks very smart.
 
  • Like
Reactions: F4B UP
CIMG6380
The brakes for you prawn.

As for numbers the mods done have caused a larger intercooler to be purchased due to high temps.it's more than it was before by a good 20%. No graphs yet but bills told me a figure and that's good enough! I'm sure a graph will come once it has cooler inlet charge.

So intercooler to fit and then we'll see before round 2 of mods.

Spec is 1.9 (low comp) with built bottom end.large port (ported) head with supertech valves. Custom tubular manifold with gt 3071 hta turbo, 3" dp. wmi
IMAG0154

Car has kw3s,18" dynamics wheels, Porsche turbo brakes,blue haldex controller.

As for bumper it was done by the previous owner. I'll take some pictures when it's getting 're cut.
 
New intercooler has turned up at home. Toyosports 3" one. Trouble is I'm currently based in Norway for a few months so I'll try and get the bumper off for a line up.
 
Was good meeting you on Sunday mate! Some big power coming out of B5 this year! :)
 
  • Like
Reactions: F4B UP
458072_297781060339986_2031930162_o.jpg


One we do from Toyo core for S3, retains fogs etc

Alternatively something like this we did on TT
457988_297784230339669_1354170900_o.jpg
 
  • Like
Reactions: Gops and F4B UP
something like this we did on TT
457988_297784230339669_1354170900_o.jpg

That works, I don't have fogs due to old intercooler set up. Thanks
 
Last edited:
So I've only really been using this to commute to the airport and back but I have a few things to sort. The thermostat seems to be sticking as unless Chou give it loads the temp hovers around 75-80. The exhaust now vibrates when hot on something. Could be broken rubbers or a bit of mis alignment but also the engine mountings need uprating as there shot and it produces a big slug of torque now!.
 
clamps on exhaust pushing into heatshield above my guess
colder stat in there marcus I think

ps. you have mail
 

Similar threads

Replies
15
Views
2K
Replies
28
Views
2K
Replies
28
Views
2K
I
Replies
20
Views
993