nickatkinson
Registered User
The car was picked up on Friday and asked the dealer not to wash, which I think was honoured. The paint was in really good nick with a few bits of transportation wax and residue and a few swirls mainly on the bonnet.
The process was:
1) snow foam using lance and Autofinesse Avalanche (mixed with hot water)
2) jet wash off after around 10 minutes or so
3) wash using the 2 bucket method and a Microfibre madness washmit instead of the usual lambs wool one.
4) Clayed using Bilt Hamber soft clay and Autofinesse glide
5) polished by hand due to how minor the defects were. Used Lake Counry red light polishing pads and Balckfire Gloss enhancing polish. buffed off after each panel.
6) Sealed with Blackfire Wet Diamond using the Balckfire applicator and Swisswax micro
7) was going to use the Blackfire Carnuaba wax but the rain started.
8) sealed wheels with Hi temp paste wax
9) sealed exhausts with the hi temp paste wax
8) dressed tyres using Endurance
9) Cleaned windows using cheap window cleaner. Will seal with G technic when the weather is better.
10) detailed inside mainly with an anti static cleaner and leather protection.
Last edited: