6 x PDC harness cable A3/S3 8p needed!

Hi Guys
I think my PDC harness for the front bumper has had it. The sensors all seem to work cos they have a pulse, none of them are chipped. When I move the harness around, sometimes it seems to stop beeping, and then all of a sudden it'll start beeping out of nowhere.

The product code I believe is 8P0971085C

I can't find this on ebay as they seem very rare (but the 4 PDC harnesses are easy to come across)

Can anyone point me in the right direction to get a new harness...Audi quoted way too much.

Cheers

here's another pic

NHN said:

Just repair the old one.

Click to expand...

there's so many wires......i believe its somewhere on the 2 front grille sensor wires/connections. any tips on how to repair it?

kanecullen89 said:

What symptoms were you having? On my b8 the pdc wouldn't work. Used vcds and came back with faulty front sensor. Replaced it and still not working. I'm thinking my look has had it too. I'm going to try to take the bumper off to see if I can repair the wire if I can trace where it has failed.

If you're after a new loom, try here: http://www.kufatec.co.uk/shop/en/au...ensor-harness-audi-a4-8k-a5-8t-q5-8r-a6-a7-4g

That's the one I need for £39. You may be able to find yours. I'm going to try a repair first though

Click to expand...

I managed to just find one from a polish online store. My one uses the 6 x pdc connections for Park assist so the one in your link won't work as it's for 4. Finding the looms with 4 was much easier.

The symptoms are intermittent beeps from the front which cause the rear bumper sensors not work properly when reversing up to something which is annoying as I much prefer the use of rear sensors than the front.

Park assist still works though... but the beeps still go insane when the car parks itself.

I hope a new loom will fix it. Audi Germany quoted 450 aud delivered but I've managed to find one for 60 aud delivered.

Will see what happens when it gets here in about 3 week's.