JudderMan
Registered User
Been a while since I updated (or did anything to the car other than oil change and MOT) had lots of things to buy and pay out over the winter so the car hasn't had any goodies. The MOT just needed a tyre and bootlid latch.
I fitted the carbon fibre vinyl wrap today. Looks OK, some rough edges and have tonnes left so will do these again. I wanted to see if I could get away with it once fitted but some corners are noticeable....never been good at wrapping Xmas presents and doing this is similar....For refernece, I bought the 3D carbon vinyl from eBay which has tiny air holes in it to help remove bubbles. Just the corners I struggled with, I'm not very good at that sort of thing. Lemme know what you think...better than the wood trim under it (pic). Just need to do the ashtrays and gearstick surround, will probably aim to do those in situ as I don't want to remove yet more of the dash to get to them, plus using a credit card you can smooth off the edges and stick em down in the gap and I 'think' it should work just as well, I didn't see much benefit of taking the pieces off apart from I could do them in the house.
How do you take the piece of dash off that goes around the light switch on the right-hand side of the steering wheel? I can't figure it out nor see any bolts....
Still not remapped, but have decided on Rick Unicorn Developments OBD thing. Removed the decat for the MOT and didn't replace it. Not sure why as I really liked it but just changed my mind and wanted a less ostentatious noise when driving around. Think I'm older than I really am...Still need wheels and tyres, thinking about A5 or RS4/Sline wheels and some Eibach springs as it looks like it's on stilts.
I fitted the carbon fibre vinyl wrap today. Looks OK, some rough edges and have tonnes left so will do these again. I wanted to see if I could get away with it once fitted but some corners are noticeable....never been good at wrapping Xmas presents and doing this is similar....For refernece, I bought the 3D carbon vinyl from eBay which has tiny air holes in it to help remove bubbles. Just the corners I struggled with, I'm not very good at that sort of thing. Lemme know what you think...better than the wood trim under it (pic). Just need to do the ashtrays and gearstick surround, will probably aim to do those in situ as I don't want to remove yet more of the dash to get to them, plus using a credit card you can smooth off the edges and stick em down in the gap and I 'think' it should work just as well, I didn't see much benefit of taking the pieces off apart from I could do them in the house.
How do you take the piece of dash off that goes around the light switch on the right-hand side of the steering wheel? I can't figure it out nor see any bolts....
Still not remapped, but have decided on Rick Unicorn Developments OBD thing. Removed the decat for the MOT and didn't replace it. Not sure why as I really liked it but just changed my mind and wanted a less ostentatious noise when driving around. Think I'm older than I really am...Still need wheels and tyres, thinking about A5 or RS4/Sline wheels and some Eibach springs as it looks like it's on stilts.