Can you tell me where this (these) plugs go please?! Audi Parts Dept couldnt find them on etka!

As title suggest, I am after some help with these 2 plugs as my Audi A3 2.0 TDI isnt de-immobilising and i have my suspicions this is why!

I bought what i believe to be an ex stolen recovered car which had the ignition barrels stripped and didnt even have a steering column at all when it was delivered to me!

Now fully aware i needed an ignition barrel and keys i set out to find a complete matched set up for ease!

Ended up buying all the parts from the same broken car which was the exact same spec as mine i.e 2004 2.0TDi Manual 6 Speed etc

Complete steering column down to UJ
Clusters
ECU
Ignition barrel and Key
Door lock set

Vag-Com

Once everything was fitted I used RT to resync the new key and it works (it remotely locks and unlocks all the doors)

However with the key in the ignition and trying to turn the engine over I am getting (SAFE maybe?) on the cluster and the immobiliser light remains illuminated and nothing happens with regards to the engine turning over!

I have taken some pics to see if any of you guys can help




You can see in this pic that the longer cable looks to go upto the clusters and looks af if it should be plugged into the one coming off of the ignition barrell...................... I presume this is why my car is remaining immobilised


I have been to Audi Parts Dept this evening and they couldnt help, plus all the tech's had gone home

Anybody able to give me some pointers?!

Thanks

bump

well the blue and red (short cable) is from the steering control module and the other end goes into a back of the ignition barrel aka transponder loop and the other plug goes to the dials/cluster! This is why i am thinking that the car wont de immobilise!