Hi. Is there any guide or DIY about how to remove crankcase on this engine? The only info i found is about AUM and newer engines. If it's possible to be without installing a catch can.
1.8t AGU crankcase ventilation question
- Thread starter LemonPowa
- Start date
On my AGU, I've connected the two breather pipes to a T-piece, and then to the hockeypuck, venting into the TIP.
Can you take a screenshot of the both breather pipes and how they are connected? Cause im not sure which are the breather pipes.
Thank you very much. Another question not about crankcase ventilation. With this air intake (cone filter) do you have the intake sound a.k.a turbo flutter with stock dv?
I saw many 1.8t with flutter sound but with aftermarket bov. Also im seeing them reving the engine on idle and blow off sound is there. I know that 1.8T is not making bost pressure on idle. So how is this possible?
The 1.8T is designed for a recirculation valve, not a blowoff. Blowoff valve would give running issues, and @<tuffty/> might ban you if you fit one 
If you want to run a blow off valve you would need a piggyback or aftermarket ecu. I will be running one which will allow my car to have a mafless tune. There is no way I'll run a blow off valve on an Audi though!
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
