There is information on this American site. They always seem to have more recalls and issues than anybody else.
http://www-odi.nhtsa.dot.gov/owners/SearchDetails
http://www-odi.nhtsa.dot.gov/acms/cs/jaxrs/download/doc/UCM471054/RCLRPT-15V019-4663.PDF
Seems to affect all models using the 3L TFSI engine around 2011-2012
Description of Defect :
Description of the Defect : Due to a combination of production tolerance issues and vehicle vibration during
dynamic driving, it is possible that, in rare cases, a fuel leak may occur in the
vehicle's fuel injection system. Leaking fuel, in the presence of an ignition source,
may result in a fire. There have been no reports of accidents or injuries as a result of
this concern in the United States
Description of the Safety Risk : Leaking fuel, in the presence of an ignition source, may result in a fire.
Description of the Cause : In rare cases, unfavorable tolerance conditions can lead to a minor leak at the fuel
rail / injector connection.
Chronology :
• March 2013 - August 2013: The first customer complaints regarding fuel odor coming from the engine
compartment were received. Field investigations were conducted, including analysis of engine/parts
tolerances. No abnormalities were noted.
• September 2013 - January 2014: Conducted test bench analysis, with no abnormalities noted.
• February 2014 - December 2014: Further analysis conducted, including simulations of different parts fitting situations performed on defective parts/vehicles. Analyses concluded that, if the valve is positioned unfavourably in the range of tolerance during dynamic driving, a small leak may form at the connection between the fuel rail and the injector, which then causes fuel odor.
• January 12, 2015: Recall decision made.
Description of Remedy :
Description of Remedy Program : Replacement of fuel rails and the corresponding seals.
How Remedy Component Differs from Recalled Component : Optimized geometry/tolerances of fuel rail and improved sealing.
Identify How/When Recall Condition was Corrected in Production : Implementation of reinforced fuel rail
retaining bracket in calendar week 3-2012
Karl