Welcome to the site firstly.
Hey I've done it with genuine kit & looks oem, well will when painted the sensors but as is they look spot on.
Dealers use the aftermarket type kit with reverse wire activation, not the proper canbus connected system as per factory which is why they're �300, if they used oem would be double knowing there prices.
How desperate are you to get done as I'm in Italy atm, but back end of sept & could for a price fit a system once parts sourced & if you need some reviews of me ask anyone in 8P if I'm ok to do the work.
3dr or sportback & what year of car?
Audi retrofitted the same ugly sensors to mine - I had to have a new bumper.
Here is my thread:
http://www.audi-sport.net/vb/a3-s3-...t-my-oem-style-parking-sensors-installed.html
Many thanks Ashits the blue and red cable on the tail lights loom... usually on the passenger side iirc
Too good to be true? £80 and no holes....!
Universal Parking Sensor | No Holes | Front & Rear Reverse Parking Sensors
Rats! Well my main priority is to get the wiring sorted and deal with the bumper later as I can leave them unconnected anyway.
If I post my CCM details up could someone kindly look up on elsa which wire is which please?
Address 10: Park/Steer Assist (J446) Labels: None
Part No SW: 8P0 919 475 C HW: 8P0 919 475
Component: PARKHILFE 4K H06 0101
Revision: 11001001 Serial number: --------------
Coding: 00010B
Shop #: WSC 06751 128 28888
VCID: 3E774636A9B799EEA6F-806B
No fault code found.
Did you buy a new bumper or fit brackets to the old one in the end??
Nice looking job by the way :icon_thumright:
its the blue and red cable on the tail lights loom... usually on the passenger side iirc
2) I've heard about visual parking aid (graphic of car) also showing up on the RNS-E screen... has anyone ideas of this can be done on a 2011 car?
i believe that is called Optical Parking. as far as I know you need the front and rear sensors to make it work.
i'm sure @NHN will be able to supply/fit the system
Nice work!Or have a stab at fitting it yourself!
Theres nothing more satisfying than getting a new toy working.
Nice work!
I'm in the collecting parts process for front and rear as atm I have the Audi retrofit kit.
Can i ask how you went about the front?
Did you drill your front bumper and did you use kufatec looms throughout
I have the oem sensor loom for the rear and kufatec loom for the controller