Just a quick thank you to Pat, little problem with incorrect intake being sent out (Blame Audi hey Pat) he personally came out this evening and swapped it for me, dodgy box swap at night at the side of the road lol, had a bit of a gossip and always nice to put a face to people on here.
Cheers Pat
You and I have the same engine and after some confusion at the time of ordering I was sent the correct intake. But even though it's a TSI kit i can't see how it will fit without modification. Have left a message with Pat and am waiting to hear back to see what he can do to help.Got my local garage to fit it and no it wasn't straight forward, they had to modify certain bits, but the shield did fit ok, if I was you try talking to Pat @ lvsracing as there was some confusion regarding type of engine (TFSI and TSI) even though mine is a TFSI the kit I needed was for a TSI......confused me lol
mate what intake do you have? is it the revo tsi one or this group buy one? could you post a pic?You and I have the same engine and after some confusion at the time of ordering I was sent the correct intake. But even though it's a TSI kit i can't see how it will fit without modification. Have left a message with Pat and am waiting to hear back to see what he can do to help.
It is indeed the one in the link - the TSI one. There's no way the shield is going to fit, though. The metal at the front of the shield is too high, making it impossible to get the front screw hole to line up to the air-scoop torx screw. The shield is also too deep (top to bottom) which means that the underside is resting on whatever it is that is underneath. That fact then means it's impossible to secure the long thin support (from the bottom right of the shield) to the retaining bolt also holding the battery cradle in place.mate what intake do you have? is it the revo tsi one or this group buy one? could you post a pic?
if its this one :
http://shop.lvsracing.co.uk/revo-intake-20-tsi-golf-mk6sciroccoa3-2135-p.asp
it will fit, just a very very snug fit
It is indeed the one in the link - the TSI one. There's no way the shield is going to fit, though. The metal at the front of the shield is too high, making it impossible to get the front screw hole to line up to the air-scoop torx screw. The shield is also too deep (top to bottom) which means that the underside is resting on whatever it is that is underneath. That fact then means it's impossible to secure the long thin support (from the bottom right of the shield) to the retaining bolt also holding the battery cradle in place.
Could my kit possibly contain the wrong shield..?
Thanks for the info. Anecdotally, it sounds like all the TSI guys I hear from are having fitment issues with this kit. Not something I'd expect given the price of this kit, if I'm being frank.Yea i think i ran into all of those problems too, try securing down the rear side stuff first, the one which goes by the battery and the other one. Don't worry about the airscoop one and see if it looks right. unfortunately my car is currently sorn'd at my parents house so i can't get any pictures.