S3 dual mass flywhweel tool
- Thread starter ant schof
- Start date
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
Done a couple but don't remember the tool size... M10 or M12 spline iirc...
http://workshop-manuals.com/audi/a3_mk1/power_unit/4-cylinder_1.8_ltr._5-valve_turbocharged_engine_(154-165_kw)_mechanics/enginecrankshaft_group_pistons/removing_and_installing_sealing_flanges_and_dual-mass_flywheel/removing_and_installing_dual-mass_flywheel/
Don't forget to buy new bolts for refitting
http://www.partsbase.org/audi/audi-a3-s3-sportback-qu-a3-eu-2001-10515-crankshaft-conrod-bearings/
<tuffty/>
http://workshop-manuals.com/audi/a3_mk1/power_unit/4-cylinder_1.8_ltr._5-valve_turbocharged_engine_(154-165_kw)_mechanics/enginecrankshaft_group_pistons/removing_and_installing_sealing_flanges_and_dual-mass_flywheel/removing_and_installing_dual-mass_flywheel/
Don't forget to buy new bolts for refitting
http://www.partsbase.org/audi/audi-a3-s3-sportback-qu-a3-eu-2001-10515-crankshaft-conrod-bearings/
<tuffty/>
So the quest for the flywheel bolt tool continues ! Many thanks tufty i will be using new DMF bolts once i've figured out the correct spline size to remove the old ones . I've borrowed a mates M10 12spline bit today and that also does'nt fit its just a tad too big . Now wondering if there is such a thing as an M9 twelve pont ? any help much appreciated
Ant
Ant
