Audi S3 under tray...

Looks ok... I bought a cheaper similar one.. the plastics are hard as nails but the under tray seems to work ok..

Not fitted the side bits yet as I need to mod them with dyno grooves as they are too hard to 'give' when lowered onto the dyno

http://www.ebay.co.uk/itm/261351953876

IMG_20141018_123628.jpg


IMG_20141018_123636.jpg


IMG_20141018_123645.jpg


IMG_20141018_123656.jpg


IMG_20141018_123706.jpg


IMG_20141018_123714.jpg


IMG_20141018_123724.jpg


The side bits look like they will need a little work to fit properly

<tuffty/>
 
  • Like
Reactions: Dani_B19 and Lee coley
Cheers tuffty. Mine is the drivers side and lower trim, lower has somehow gone missing haha and the drivers side has been ripped apart at the lower fixing points.

How hard are the sides to fit?
 
Lee coley said:
God that plastic looks nasty ^
Click to expand...

It does that... thankfully the ugly bit can't really be seen lol..

Dani_B19 said:
Cheers tuffty. Mine is the drivers side and lower trim, lower has somehow gone missing haha and the drivers side has been ripped apart at the lower fixing points.

How hard are the sides to fit?
Click to expand...

Passenger side you will need to unbolt the xenon leveller to remove it and the power steering pipes will need unbolting from the support bracket too...

You will need to transfer the power steering support bracket over to the new side pieces if they don't come with it (mine didn't shockingly lol)

You would also be advised to replace the 'clamping washers' as VAG call them too... item 13 in link below
http://www.partsbase.org/audi/audi-...sulation-guard-plate-for-engine-cover-v-belt/

Mine didn't come with the self tapper speed nuts either so will need to transfer them over too

<tuffty/>
 
Drove around for 2 months with mine missing. Think I'll spend £40 and order some
 
Cool cheers tuffty. The kit I've posted comes with all fittings :) so thats a bonus. Not sure on the power steering pipe bracket, I'll email them now. Seems for £43 it aint too bad with it including all the washers etc.
 
Has anyone any idea where I can get a similar one for my A3 facelift model? My centre one has been removed as damaged and I dont think the two side ones could be used again either.
 
Both links me and tuffey have posted should fit.
 
You must log in or register to reply here.

Similar threads

S
Under tray
Replies
6
Views
1K
simch
S
D
Engine under tray
Replies
7
Views
2K
inoxio
I
TDI
Under tray (Engine)
Replies
14
Views
2K
TheSpaceCowboy
T
Crazypete00
Plastic tray under engine
Replies
8
Views
3K
Jimgrim77
J
Q
pics of under tray or of under the car (S3)
Replies
6
Views
2K
valyboi
valyboi
Top
Back