Hi all, I was looking to know if injectors from a 2014 B8 A4 3.0 TDI would fit a 2006 B7 A4 3.0 TDI or is there anyway that I can get mine repaired or replacced. Did Audi recall the 3.0 TDI because of the injectors going faulty like they did with the 2.0 170 TDI
3.0 TDI Injectors Help
- Thread starter subzerokid14
- Start date
No you can't fit injectors off a 2014 car into a 2006 car. The fuel injection system is completely different between the 2 cars.
Injection pressure on your car likely to be 1600 bar max, on a 2014 car 2000 bar.
It's unfortunate that there seems to be a manufacturing / quality issue with injectors on these cars resulting in much white smoke and poor fuel economy along with other issues.
To my knowledge Audi have never done a recall on these, I think some people have had a proportion of the cost of new injectors paid for by Audi as a matter of good will but they have been lower mileage cars with full service histories. And the work has to be done at a main dealer with the associated costs.
BMK info http://www.volkspage.net/technik/ssp/ssp/SSP_350.pdf
CATA info http://vwts.ru/engine/cata/pps_941803_3l_tdi_cata_w_clean_diesel_system_eng.pdf
Karl.
Injection pressure on your car likely to be 1600 bar max, on a 2014 car 2000 bar.
It's unfortunate that there seems to be a manufacturing / quality issue with injectors on these cars resulting in much white smoke and poor fuel economy along with other issues.
To my knowledge Audi have never done a recall on these, I think some people have had a proportion of the cost of new injectors paid for by Audi as a matter of good will but they have been lower mileage cars with full service histories. And the work has to be done at a main dealer with the associated costs.
BMK info http://www.volkspage.net/technik/ssp/ssp/SSP_350.pdf
CATA info http://vwts.ru/engine/cata/pps_941803_3l_tdi_cata_w_clean_diesel_system_eng.pdf
Karl.
Ok thanks for the info. Do u know if injectors of a ASB 3.0 TDi would fit a BMK 3.0 TDi
Have a look for part numbers here
http://www.partsbase.org/audi/audi-a4-avant-a4-eu-2006-13070-fuel-rail-injector-unit-pressure-pipes/
There are about 6 different part numbers for the ASB injectors.
Looking at the A6 which lists the BMK engine, it's not listed for the A4 then the BMK and ASB injectors appear to be the same part numbers.
http://www.partsbase.org/audi/audi-a6-avant-a6-eu-2006-13070-fuel-rail-injector-unit-pressure-pipes/
Karl
http://www.partsbase.org/audi/audi-a4-avant-a4-eu-2006-13070-fuel-rail-injector-unit-pressure-pipes/
There are about 6 different part numbers for the ASB injectors.
Looking at the A6 which lists the BMK engine, it's not listed for the A4 then the BMK and ASB injectors appear to be the same part numbers.
http://www.partsbase.org/audi/audi-a6-avant-a6-eu-2006-13070-fuel-rail-injector-unit-pressure-pipes/
Karl
Take the number off of the top of the injector, then search ebay. I bought a 2nd hand one to replace one of mine, and it's still running perfectly over a year later. A lot cheaper than buying a new one!
Also, sadly, you can't easily get them repaired.
Also, sadly, you can't easily get them repaired.
hi guys thanks for the replys. im gonna try and get mine refubished as i dont wanna buy new ones at £1500. Does anyone also know when audi updated the injector because of wear on the needle.
