My S line so far...

That's my Avant on exactly the same wheels. Just need coilovers now but I will probably go for weitec tx's.
 
Last edited:
Yes m8 exactly the same size too. But I've gone for 235s all round.
 
I run the 9,5j all round now bud, 215/30 to keep away from arch lol
 
  • Like
Reactions: seandom
I didn't know that you could run 9.5j on the front. When I ordered mine from rimstyle there is only a 9.5j rear option. I do like the staggered look aswell, and at the moment my rims don't rub. Lowering may change that though lol.
 
Audi A4 19Audi A4 20Audi A4 14Audi A4 15Audi A4 16

Some more pics of my Avant with 3SDM 0.01 wheels with stock suspension at the mo.
 
Looks sweet as!!

Would love some in matt black for my red cab!
 
Cheers buddy. Your red cab would look sweet with a set of matt blacks. They do them in that colour too if you didn't know already lol.
 
Looks sweet mate I got the exact colour.nice choice. What's the chrome I can see on rear bumper and where abouts did you grab the rear lights
 
He probably won't reply to u now he's good at disappearing acts after ripping his so called family's life's apart oh yeah he didn't care
 
  • Like
Reactions: unitzero
Definitely not a subject to be discussed on a car forum. Very desperate.
 
Put comments like that in general discussion so us car lovers can ignore them :icon_thumright:
 

Omfg, I think I just jizzed, these wheels are amazing, can't believe you've gone 9.5" all round, you absolute legend!!!!

Just bought myself a set of these, obviously not 9.5" all round but still can't wait to get them.

I tried to read the whole thread but have you thought about or already took the adjuster plate outta the back to drop it some more at the back?

I run APs and still have my adjuster plate in but sits slightly lower at the back than your, but you look to have the front down more on your, my wind mine down a touch when I get mine on.

Anyway, keep up the good work, best colour too, want to see this in the flesh!!!!!
 
Oh also don't you have trouble with the front arches rubbing on full lock? The paint has flaked off mine due to my wheels catching on full lock when getting outta my drive? Currently running 18"x8.5" on Et30 so poke out like yours on the front!!!!
 
im running these rims on 19's on my avant, they seem to be getting a very popular rim nowadays. so im thinking of getting mine done satin black
 
Cheers for the comments. Adjusters were still in above but out now, and lower front too.
 
Few quick snaps from last night

imagejpg10_zps48f7199a.jpg


imagejpg9_zps81d432c2.jpg


imagejpg5_zps6ef2a582.jpg


imagejpg6_zps0fc86e12.jpg


imagejpg1_zps6c9d754e.jpg


imagejpg6_zps43bfaa54.jpg


imagejpg5_zps931ac00c.jpg


imagejpg2_zpsd56ca4aa.jpg


imagejpg4_zps648edbce.jpg


imagejpg3_zps01731878.jpg
 
  • Like
Reactions: barkclark, DieselJake, TOM.S and 1 other person
Mines too much personally, 215/35 on a 9.5" wide rim! Need a smaller stretch but then will need to set up suspension again and arch gaps and spacers - so I'll just stick with these lol
 
Mines 225 on 9.5J and its enough, wouldnt think of going any more than that, i'd be scared to drive the thing lol
 
Only just seen this, yeh any more and they leak abit of air after abit of time!
 
Got full leather interior in now :)

Just awaiting door cards but no rush as of yet!
 
How much did your leathers set you back?

Also, do you know how low you are e.g. 90mm?
 
Leathers were an eBay bargain ;) keep an eye out, b6 seats fit also but all o had to do was sort out the airbag wiring.

As for 'how low' I think I'm 23" from FTG front and 23 and 1/4" rear. But it's litterally as low as possible on 18"s with a lot of stretch and some camber with rolled and pulled arches
 
I've always avoided B6 seats, simply because i wouldn't know how to fix the airbag error. Was it an easy fix? (I don't want to clutter your thread so if it's easier to PM)
 
loved my old B6 leather sport seats. I think they were more comfortable than my current S-line ones !

Are these the ones you have ? (found an old pic of mine from the for sale ad.)

7080651913_e1148c9c8d_z.jpg
 
Yeah they're the ones just black, air bag was an easy fix but needs to be done properly.the only issue I had after was the seat occupancy sensor. But soon got round that via VCDS.
 
I've always avoided B6 seats, simply because i wouldn't know how to fix the airbag error. Was it an easy fix? (I don't want to clutter your thread so if it's easier to PM)

Resistors and/or coding usually work wonders.
 
  • Like
Reactions: Whopper
what winter mode ? are you expecting some snow ? :meeting: Do you drive 17"with winter tires ?

Hopefull for some snow but I had a puncture in the rear and the other rear unsealed because of the stretch so just put old alloys on
 

Similar threads

Replies
57
Views
5K
Replies
90
Views
11K
Replies
12
Views
4K