Haven't done it yet on my Audi but did do in my vw polo I took the bits I wanted to spray out give them a good clean scrach over with some super fine wet and dry paper use a good plastic etch primer witch eats in to the part slightly leave to dry a very gental going over with super fine paper again to flattern it off wipe over with a tac cloth then use what ever top colour you want make sure its a plastic coat spray. If you want a high gloss finish you can put a few coats of lacquer on it little hint don't try a hit the part all in one go with the spray build up the coats until you have the finish you want as trying to spray in one go will leave runs or a poor finish.
What interior parts do you mean? I've just finished painting and fitting my facelift centre consol, grab handles and door lever and surrounds in Volvo grey, will get a picture
I went to supercheap auto and was told to paint it with plastic/vinyl paint. Pained it on the weekend and it looks sick. I thought about wrapping the centre console face but I'm limited with colours since I've put blue S3 recaro's in the car.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.