Audi A3 8p Parking sensor problems

John-Spooner

Registered User
Joined
Oct 16, 2014
Messages
6
Reaction score
0
Points
1
Hi

This is my problem, I'm getting a long beep when reversing.

Address 76: Park Assist Labels: 8P0-919-283.lbl
Part No SW: 8P0 919 283 C HW: 8P0 919 283 C
Component: Parkhilfe 4-Kan H09 0050
Revision: 00H09000 Serial number: 00067824820611
Coding: 0001013
Shop #: WSC 06435 000 00000
VCID: 3B7F0B897A5D65C68EF-806E

1 Fault Found:
01547 - Sensor for Parking Aid; Rear Mid-Right (G205)
009 - Open or Short to Ground
Freeze Frame:
Fault Status: 01101001
Fault Priority: 3
Fault Frequency: 11
Reset counter: 110
Mileage: 217314 km
Time Indication: 0
Date: 2014.10.07
Time: 13:13:49

Could any one help me.

Best Regards
John.
 
Either the sensor's faulty, water in the connector/sensor or its come unplugged, reach up behind the bumper & check its pushed home, if so, unplug & then replug, only way to check for water ingress is to remove sensor & check inside connector socket for signs of water, it may have got into the sensor itself which is known of.
 
Whats the easy way to reach it, because form what I seen theres no way going underneath, would I have to dissasamble the whole bumper ? or is there a way to reach it from the boot ?
 
I've managed to get behind the bumper from underneath, if you cant then bumper of, you'll have to see which route is more suitable for you.