How To Code Out Brake Pad Warning

chris_foci

New Member
VCDS Map User
Joined
Jan 22, 2007
Messages
16
Reaction score
1
Points
3
Location
NULL
Hi

Anyone know how to code out the brake pad warning on a 2012 Seat Exeo ST? Basically an Audi A4 B7 model with a Seat badge.

I have looked on the RossTech site and Wiki page but have had no luck.

Many Thanks
 
you cant

you can bridge the plugs to not show the warning.

what problem do you have ?
 
Bridging the wires was what I intended to do untill the original connector on the pads side of the loom disintegrated in my hand when i removed it. Very strange!! I had read somewhere you could code out the warning.

Ill try and source another wear sensor to bridge together as my pads are fine.
 
Just do it where the sensor would plug into the car loom.

Either that or strip the sensor wire back a few cm
 
Just do it where the sensor would plug into the car loom.

Either that or strip the sensor wire back a few cm

Cant do that due to the way its disintegrated. Another wear sensor now sourced and bridged and working fine.