Jet2004uk
Registered User
True MattKeating, when I tried to apply the new canbus update it wouldnt allow me to do it, Zenec informed me to disconnect the battery for 30 mins for everything to power down and reset after that it went has planned
That was my main concern, I wanted a professional looking job, I had a look to see how easy it would be and decided I was not capable of doing it so I asked my local garage to install and hide the wires in the trim, it turned out to be quite a job with taking all the boot trim off and wiring in the camera and feeding the wire to the head unit, took them best part of the day and yes it cost me but I am well happy
Hi AK47UK
When I had problems I cantacted Zenec on the below email and they did respond
support@zenec.com
Cheers mate, I did see they were listed but on their site they don't seem to offer most Zenec parts. Will contact them now.
Yeah, nice and easy, cheap too. Cost about £35 as I wanted to pick it up on the day and fitted myself
Also just heard back from connects2, as I expected they said I would have to return to the manufacturer and as (I think) it is out of warranty it would be assessed and quoted. Cost of this is £35 to cover connects2 time and courier both ways, repair cost will be in addition. I think I will just try and repair myself to save time. Very impressed with the speed and content of the support from connects2, I messaged Zenec and CAD on the day of the problem and neither have responded.
which is available from Rapid electronics: http://www.rapidonline.com/electron...-d-plastic-shaft-vertical-with-switch-49-6180ALPS STEC12E08 Encoder With 6 MM D-plastic Shaft Vertical with Switch