Finally I began assembling my third car.I already painted them two years ago ...
... he became a sanctuary for all the cats from the village and waiting for me to take time for him ...
... until today when I installed the electrical installation inside ...
... and finished the rear part of the car ...
Love Corrado's! What engine are we running?
I've just done exactly the same as you. chucked my injectors in a ultrasonic bath and replaced the breather bellow the inlet manifoldCleaned my injectors in the ultrasonic tank, found and fixed a fuel leak and replaced a split PCV hose.
MPG has gone from 21 to 31, Win!!
View attachment 35175
View attachment 35176
Looks smart, is that just an EBay FMIC kit? Looking at one for mine atm, but want to retain the fogs/ keep it completely stealth; easier said than done with an A3 bumper i gather.
I got the core from eBay and bought all the pipes from auto silicone hoses (also on eBay) so not a kit as such.
I've managed to keep the fogs but had to lose the grills next to the fogs, with black pipes it doesn't look too obvious though. If you can find JayA3's build thread I used his pipe routing/options. It's not the best fit, at the moment, need to trim a couple pipes down and got a bit of cobra necking on the cold side which would be solved with a 135 silicone instead of a 90. Even with the cobra neck it is no where near as restrictive as the stock system.
Edit: just seen you are also in Plymouth, you're welcome to come and have a look, just drop me a pm, I can probably give a few ideas on how to improve it a bit
Fitted most of this lot
<tuffty/>
Where did you order the ARB's from and their bushes? I'm thinking of doing the rear ARB on mine when i stick the new cat back on. Don't think I'll venture down the route of dropping the subframe yet however, not without a 2 or 4 poster!!