Adjustable Spring Perch ?

lorryz

Registered User
Joined
Apr 14, 2012
Messages
141
Reaction score
30
Points
28
Location
Brisbane, Australia
I'm looking to raise the rear of my car (s3 8l) to match the current height of my front end +10-20mm.

The only thing could find that would work are the these Adjustable Spring Perches for the tt 8n/mk4 R32 etc.

xZWX4No.jpg


They look alright but they are $45 each plus shipping.

Is that a cheaper solution like solid/poly perches that will give a bit of height over the OEM rubber ones? ( I couldn't find one).

Or perhaps a cheaper adjustable perch ?

Cheers.

fMZSydf.jpg

Above ECS poly-perch for FWD only apparently.
 
What springs are you running on the rear? Do you have the original rubber spring seats in place top and bottom?
 
  • Like
Reactions: lorryz
What springs are you running on the rear? Do you have the original rubber spring seats in place top and bottom?

Running H&R rears, I believe i do have both stock seats in place. I don't think i removed them when i installed the springs. Been a while since I've looked.

I just figured there might be an aftermarket poly seat or spring spacer that i could buy for a couple of bucks, that would give me a few extra mm.

Rather than spending $90 dollars + postage on an adjustable perch or new rear springs.

I'll keep looking, but maybe it doesn't exist.
 
Last edited:
Eibach rear springs come with a rubber spacer that is fitted in addition to the OEM spring mounts, it is about 8mm thick, but because of the spring position raises the rear height about 15mm.

Not sure whether Eibach would supply you with a pair if you ask for them as 'spare parts'.

Here is a picture:

IMG 23711
 
I have been looking for a spacer for the spring, I'm not sure a wheel spacer will give me much height (rear wheels have +20mm spacers on them already).

Perhaps i'm using the wrong search terms.

I meant a wheel spacer to put on the spring seat to raise it in height, should work depends on the centre hole diameter