Glove Box Lighting - How is it connected with the Factory install

Hi

I have just completed the door warning & puddle lighting & LED retro fit ( Looms & Led's provided by T8ups ) am about to retro fit the Glove box light and foot well lighting and would like to know how these are wired out of the factory as I am trying to get as close to an OEM fit as I can.

Does anyone have this detail or it this just not possible ?

If not when doing the glove box light is it not possible to just hook up to the existing wiring that is already fused and loom tape this up for an OEM finish rather than adding ground wires to a nut on the car body ??

Now I know some of you are going to say "But you cant see it " its just one of those OCD moments

bez101 said:

do a write up when you do the glovebox and footwell lights

Click to expand...

I will do, I have been taking photos of what I have done so far and intend on doing a Mods to my A4 B8.5 topic

Also I have just remembered that my old B6 has a glove box in it so ill be looking at how that is wired as this is factory ....

I have completed this today I took feeds from the fuse box I will post some photos later.

Just the footwell lighting to do next