aterro
S3 YO
Fitting a pioneer headunit to my S3 with bose.
Ive used the CT51 adaptor.
The black box of the CT51 has a black earth, which I've earthed against one of the screws in the back of the headunit⦠which i presume is fine as it then gets the front and rear speakers working.
But at low down under 10 volume, there is slight fuzzy noise coming from front speakers.
These are the remaining plugs i haveâ¦. What do they do firstly?
The one wire in the red plug ( purple in colour)
and the brown plug ( which goes to the back of the old head unit ( standard)?
and then i have a spare brown plug from the CT51 unitâ¦...
Do this look right to you lot...
Everything plugged up.
The remaining plugs
The remaining plugs up close
Anyhelp would be greatly appreciated...
Ive used the CT51 adaptor.
The black box of the CT51 has a black earth, which I've earthed against one of the screws in the back of the headunit⦠which i presume is fine as it then gets the front and rear speakers working.
But at low down under 10 volume, there is slight fuzzy noise coming from front speakers.
These are the remaining plugs i haveâ¦. What do they do firstly?
The one wire in the red plug ( purple in colour)
and the brown plug ( which goes to the back of the old head unit ( standard)?
and then i have a spare brown plug from the CT51 unitâ¦...
Do this look right to you lot...
Everything plugged up.
The remaining plugs
The remaining plugs up close
Anyhelp would be greatly appreciated...