So I bought some new wheels (OEM A8 wheels) and fitted them yesterday. get a little scrubbing on the drivers side rear so had a look and the drivers side wheel sits further out than the passenger side. Camber looks similar on both sides.
Is there anything mechanical that can be off to cause this? And subsequently allow it to be fixed.
My only other thought is that the car is bent but would rather not go there.
Talking about 10mm of difference Id say. Surprised its rubbing as its only 8" ET47 vs 7.5" ET54 so around 13mm less offset than the std wheels.
Cheers all.
Is there anything mechanical that can be off to cause this? And subsequently allow it to be fixed.
My only other thought is that the car is bent but would rather not go there.
Talking about 10mm of difference Id say. Surprised its rubbing as its only 8" ET47 vs 7.5" ET54 so around 13mm less offset than the std wheels.
Cheers all.