Hello all, just scanned the car today as it decided it would go into limp mode after about 30 mins on the Autobahn....
And heres what popped up....
Wednesday, 03 August 2011, 21:01:27.
VCDS-Lite Version: Release 1.1
Control Module Part Number: 06A 906 018 AQ
Component and/or Version: 1.8L R4/5VT MOTR HS D03
Software Coding: 04000
Work Shop Code: WSC 06313
VCID: 719556C728A7
2 Faults Found:
00561 - Mixture Adaptation
14-00 - Adaptation Limit (Add) Exceeded
01262 - Shareware Version. To Decode all DTCs
26-10 - Please Register/Activate - Intermittent
---------------------------------------------------------------------------
Wednesday, 03 August 2011, 21:07:48.
VCDS-Lite Version: Release 1.1
Control Module Part Number: 06A 906 018 AQ
Component and/or Version: 1.8L R4/5VT MOTR HS D03
Software Coding: 04000
Work Shop Code: WSC 06313
VCID: 719556C728A7
1 Fault Found:
01262 - Solenoid Valve for Boost Pressure Control (N75)
26-10 - Output Open - Intermittent
---------------------------------------------------------------------------
Any ideas? i'm goin to check the wiring to the N75 when i go to work tomorrow, but i'm not sure about the "Adaption Limit exceeded" one. not long replaced my lambda sensor so that rules that out pretty much, and the MAF was replaced about 2 months ago aswell.
Any help would be greatly appreciated,
Cheers
Robbo
And heres what popped up....
Wednesday, 03 August 2011, 21:01:27.
VCDS-Lite Version: Release 1.1
Control Module Part Number: 06A 906 018 AQ
Component and/or Version: 1.8L R4/5VT MOTR HS D03
Software Coding: 04000
Work Shop Code: WSC 06313
VCID: 719556C728A7
2 Faults Found:
00561 - Mixture Adaptation
14-00 - Adaptation Limit (Add) Exceeded
01262 - Shareware Version. To Decode all DTCs
26-10 - Please Register/Activate - Intermittent
---------------------------------------------------------------------------
Wednesday, 03 August 2011, 21:07:48.
VCDS-Lite Version: Release 1.1
Control Module Part Number: 06A 906 018 AQ
Component and/or Version: 1.8L R4/5VT MOTR HS D03
Software Coding: 04000
Work Shop Code: WSC 06313
VCID: 719556C728A7
1 Fault Found:
01262 - Solenoid Valve for Boost Pressure Control (N75)
26-10 - Output Open - Intermittent
---------------------------------------------------------------------------
Any ideas? i'm goin to check the wiring to the N75 when i go to work tomorrow, but i'm not sure about the "Adaption Limit exceeded" one. not long replaced my lambda sensor so that rules that out pretty much, and the MAF was replaced about 2 months ago aswell.
Any help would be greatly appreciated,
Cheers
Robbo