Recent content by Yellowtrophy

Also, if you have a seperate DRL button next to your light switch, then pretty sure it will have Xenons.

I had this happen once when driving through a good-and-proper Perth thunderstorm! I was a bit worried, but it has never happened since. I think the seal must have made poor contact when closing the roof before the rain, and seemed to sort itself next time I opened and closed the roof.

I just leave it! It doesn't latch now, but I have nothing in it anyway, and never have the need to lift it up! Seems a few of us have the same problem though, not a great design then really!

Could anyone point me in the direction of where I can find instructions on how to remove and replace the brushed aluminium windscreen surround (A-pillars and header) on a B7 Cabrio? I had my windscreen replaced by Autoglass shortly before exporting the car with me to Australia, but they didn't...

I think the standard headlights really soften the front too. I have the S-Line bumper/grille on my A4 cab, but I also have the OEM Xenons. You may want to consider fitting those (although it is a big job), or seeing if there are any aftermarket projector-style headlights, as I really think they...

So one error then... I stand corrected, the DTM grille is in fact the small one. I always thought they didn't look quite right at the front! Easy mistake, as I've never actually seen a DTM in the flesh over here! However, the fact remains that the S-Line grille will not fit the standard bumper.

The definitive answer is no, unfortunately it will not fit. The S-Line grille is a couple of inches deeper (vertically) than the standard grille, therefore the bumper requires a larger aperture. Only the S-Line, DTM, S4 and RS4 bumpers have the larger aperture. If you want to fit the larger...

It'll be the same as mine - last of the B7 cabrios. His sig says "S-Line Special Edition", which is the car I have, but I think his might actually be the "S-Line Final Edition" as his 18" RS4-style alloys are black, and he has RNS-E (both standard). Either way, these won't fit because not only...

As some of you may recall, I moved to Perth in Australia last April, and brought my A4 Cabrio over from the UK with me. With a new country, new house, new job and even a new baby, it has taken a while before I got round to taking any photos! However, I took some over the past couple of weeks and...

I have a mark in exactly the same place on my 08 cabrio. I put my roof up and down all the time, and have rub marks in several places. It seems to happen to all the A4's afer a while. I guess making sure the roof is clean and perfectly dry before putting it down will help, but I'm not going to...

Here is a picture of mine with matt anthracite R8 alloys:

I don't think I can post a link to another forum on here, so I've sent you a PM with an excellent guide to this. Cheers Paul

My A4 cabrio is currently on its way from the UK to join me in Australia. Part of the import process involves identification of the gas used in the system. My car is a 2008 B7 cabrio, and Audi UK have advised that the system is CFC-free, but does anyone know what the actual gas used is? Thanks...

I had the same problem on my B7 Cabrio when I had the Milltek fitted. They stuck out about 1" more than ideal, so basically I cut 1" off each of the tailpipe finishers. You also will have to extend the slots (when you look there are 4 slots on each tailpipe finisher where they connect to the...

I've recently moved from Ainsdale, Southport (just north of Liverpool) to Perth in Western Australia. My A4 Cabrio is in a container being shipped over here. I just cannot wait until it arrives, and I'll be sure to post plenty of pictures when it does!