Recent content by Stickystuff

Sorry to Revive an old thread, but I am looking for a local company to remap my saloon 3.0TDI. It's a multitronic and a rare one oddly as its only a 205PS FWD model. Looks like they didn't make too many as most are quattro. I'm looking for someone to remap the engine and gearbox too local to...

Managed to get it resolved, I think I will do a little more searching now I know roughly what I am looking for, the only thing is a user gave me the code for the ABS module. This isn't something that showed so not sure how they knew that. But the engine and central module is all easily solved on...

I'm using VCDS registered on a HEX V2 plug and cable. I only have a basic sounds system so it won't display the car or trailer in the screen unfortunately. Unless you know a way of activating this? In the above coding what section do I go to change that as in what module?? I looked at the...

I've registered to the Ross tech forum, I wouldn't have a clue on what coding I will need for my modules and I don't want to put the wrong code in and screw it up. I know it always suggest to take note of the original coding. But B8 has module 44 and I have a B8.5, I just need to be patient...

Amazing thank you! Will give it a go! Might have to wait with Christmas and all but will certainly give it a go on Boxing Day. Or I’ll sneak out tomorrow to be cheeky and spend some time on it. Thank you

Any ideas where? I searched but it only shows the kits available

Also it keeps coming back with the coding issues on the abs module

Do you know how to do that? I went into canbus and added the towbar. I thought that by telling the central system it would tell the other modules it has a towbar…

Checked again and it shows the same 3 faults in the engine but no faults in the abs

Good afternoon all, I wonder if anyone is able to offer some advice on the correct coding. When I first plugged it in it had a host of fault codes in a few modules but the battery had been disconnected so I deleted them and only a few came back. I told the car that there is a towbar module...

So I've just found a Thread on Audizone and the B9 carrier has a different bolt spacing to the B8/8.5 so It looks like I will be getting some B8 rear calipers. They did however mention that the servomotor is different on the 8 and 8.5 so need to make sure I get 8.5 calipers. Worst case I would...

I’ve got solid rear discs so need both calipers and carriers. If I can find a good deal I may take a punt on the B9 calipers all round and see where it takes me. I’ve looked and the rear discs are the same dimensions as the B8/8.5 so the offset etc is the same. It’s just the bold pattern might...

But you have an S4 so already have the 330mm rear brakes. I think I’ll just find a pair of B9 fronts and then a B8 set of rears and then at least I know there should be no fitment issues. I appreciate everyone’s help. It will need to be next month I’ve just ordered a tow bar and wiring kit...

I know that about the carriers I just refer to them as a whole because most of them are sold on eBay with carriers. I’m trying to figure out if I can fit the B9 calipers and carriers to my B8. There is a set on eBay with both front and rear, the brake discs are the same dimensions but it doesn’t...

Hi all, I’ve recently acquired a 2012 A4 moving on from my 2005 A6. But I’ll be changing a few things on this. My question is, does anyone know of the B9 S4 Rear brake calipers and carriers will fit on the B8.5? I know the mod needed to get the front to work but as mine isn’t a Quattro I...