Still working on the vagcom :(
After closed inspection fuses are all ok and found them all too! Lol
I have 7.5v going fan so I am assuming that the controller is ok and this is merely a low speed voltage... Is this true?
Yes that was good to see, I applied 12v to the fan and no go so pretty sure this is the problem. I will look to see if I can test the controller, still not sure why I only get 1.2v at the fan plug though... maybe that is a sign of a dead controller too... seems odd that fan and controller have gone.
Hi there,
I have a VAG COM but never used it before (think its the free version) and although I followed the instructions to scan it seemed to do with nothing appearing at the end.. I know this may sound dumb but I assumed that if there were no error codes then it would tell me and not simple...
Hi :)
I have a copy of elsa win coming but as this heat I need to fix ASAP! Lol
The one thing that is missing is the tell tale click and rpm drop (slight) when the air con kicks in. The fan does NOT come on so will go for the other fuses and if I can find the fan plug then see if it is getting...
Lol that is fair enough!
Is it worth investigating the sensor if I don't get the econ light on full time? it comes on when you press the econ button but goes off when you press auto?
Also, I have heard a rumour that there are other fuses to check out too apart from the 40amp ones, is this...
Wow!, that reply is absolutely fantastic, thank you so so much!
I only have the red light on the econ mode when you press it, there is pressure in the system as I had it regassed and they said it still had pressure in before they drained and regassed so think the condenser should be ok, will...
Hi guys,
I know there are a few posts on this but I cannot find my specific issue.
The fan isn't working, I had it regassed, it had pressure in so there is no leak but that didn't sort it, I have checked the fan and that is ok and the 40amp fuse is ok, what else could it be?
I have heard it...
Gents, many may have seen my oil pressure mercy posts a little while ago chasing these 3 beeps...
Anyway, long story short, replaced oil pump, pressure switch and non return valve, replaced pickup pipe and cleaned everything and have moved from a proper oil pressure (noisy top end) problem due...
Hi Westy, thank you i will try that tomorrow. I must admit that i guess no news is usually good news in the fact that it will most likely be trivial :)
It was an OEM stat too, heard too much bad press on non OEM ones...
Hi guys,
Fitted a new oil pump and gauze and replaced the stat and coolant whilst I was there as car wasn't getting up to temp and all is fine and dandy BUT I have noticed that no matter what temp inset the car to the fans blow warm then cold constantly alternating resulting in a really hot...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.