Recent content by Lloyd149

00588 - Ross-Tech Wiki The fault logged, is saying the Airbag Igniter (N95) on driver's side resistance is too high. Would I be right in thinking this is probably down to faulty wiring, if not the igniter itself has broken. How easy is the task in hand to get to the igniter? Where...

I too have noticed a slight increase on the MPG, idling is also smoother.

Or buy a 'Bobble Off' from JMC, available in all good Boots stores nationwide. R.R.P about £6.

Just fitted a new thermostat on mind tonight in about 40mins. Yes the bottom bolt is a pain, but best way is to use allen keys. You'll need one short one and one long reach one with the ball on the end of it. Short one to crack the seal then start using the ball end of the long reach one. When...

Keep the up the work mate, you'll get to it eventually. Just recently I think i've got a leak somewhere, so been following your thread. Mine sounds like it's coming from driver side, had a similar sound before Xmas and it was a split hose from the charge pipe to the N75. Everything seems fine...

Just done this tonight too, did it exactly as Dave has with a ultrasonic cleaner from Maplin's. A fair amount of dirt has come out of them all. I'm sure it will help mpg, but how noticable i'm unsure?

Balls forgot about this. I'll be sure to enter next months. Good pics folks.

How easy are the injectors to remove? If you have time might be worth a How To Guide, Dave?

Thats great work, clarity has really improved. Love polishing red cars.

Nice results!

This post reminds me of this... '96 Jeep Cherokee: Need Opinions - JeepForum.com

Haynes manual, for A3. Alot of it is relevant for the S3 just not all. Pretty simple job. Take your time with it all and check you have everything. Bleeding your brakes, you need to bleen master cylinder, two bleed nipples. You will need to loosen the charge pipe to get access. Best buying a...

I've had good results with Autoglym Active Stain Remover I think it's about £12 from Halfords.

I'm too CC1 and sometimes get TC coming on rolling in 1st gear, don't think i've had it in 2nd?

Are pads seated right in caliper?