Recent content by LandSpeed

Front & Rear Coil Springs taken from my A4 1.8T, these sit lower than standard B6 springs, very good condition. £35 ideally as these are heavy from Birmingham. Please PM me if your interested

I've got a GmbH lower front bumper and a S4 rear bumper with holes for parking sensors that I'm selling if anyone is interested. I bought both brand new from the dealer and never fitted them. Also both are unpainted

all sorted now, its 3 keys that are needed to remove and not 2 !!!!!!! hence why it wouldnt come out :blush:

thanks guys i will try this now, jb0o, i put the RNS-E in without the use of the keys, only when i tried to take it out i used the keys

thats right my rns-e is stuck in dashboard with both the removal keys in their slots and will not budge. Ive just done the rns-e install and was putting everything back together again, i did a quick check to see that i could remove the rns-e ok with the keys before i screwed in the tunnel and...

im currently undecided if to perform the single din to double din conversion myself or have a proffesional do it. ive got the pdf file of the retrofit but feel it isnt very clear. Just want a full picture guide of the install if i do decide to tackle the job myself

JAS11N did you do the full picture single din to double din RNS-E install ? woulb be good to see it if you have :D

Here KUFATEC GmbH & Co. KG - RNS-E Bundle RNS-E Adapter + antenna adapter + Unlock key 34521

i would not atempt to put them on looking like that

i have electric seats and yes i can raise and lower the front of the seat base indipendently to the back portion of the seat base. Hope this helps fourcircle

can you let us know how you get on with this philW as i have the same problem

I was up at Shark Performance today to get Cruise & DIS fitted and these people were fantastic, nothing was too much trouble and they really knew their stuff. Would highly reccomend them. I drove up to their base in Mansfield from Birmingham and would not hesitate on going back up there again. A...

i have in mine, you think this may be a cause due to drainage channels being blocked ?

is there anything damp kept in the boot ie golf clubs ? there is a vent on the saloons (i know this doesnt count on your part philW) under the high level break light which goes directly into the boot and any moisture from the boot area may make your windows steam up.

Where did you go to get yours re-painted, ive got a few things that need doing, including getting my lowers colour coded but want somewhere with a good reputation.