Recent content by JSWD32

Thanks guys for input, I think I'll order a new n75 and give that a go, as for fault codes the audi garage have said there are none. I don't have VAG.com so wouldn't know. I'm based in Truro and do know of falmouth garage. cheers J

Thanks fjtwelve, Did yours do the same thing then? Mine is acting really bad and stalls first thing in the morning. Who does the work on yours in falmouth? Would like to find a good garage thats not Carrs and knows a bit about engineering instead of laptops. regards Jonathon

I have an Audi A4 2001 pd 130, and it has the worst problem you can have with a car! A fault that cannot be found! I have taken it to an audi dealer twice to be told there is no fault! I have taken it to 2 individual diesel specialists who can't find the fault! The symptoms: 1.When under...

Hi does anyone know what In 2 means on the odometer? thanks Jonathon

Thanks andy tried that and nothing..so it must be faulty... do you know if you can retrofit a newer audi headunit into the same space? I know the newer ones use Canbus and wondered if it was the same as on earlier models? thanks

I have recently bought an a4 1.9tdi 110 97 plate quattro, it is fitted with a concert 1 head unit and an audi 6 cd changer in the boot. The cd changer has power, but i cannot make a connection to the head unit, I have no idea where to start because i wasn't provided with the headunit manual. Is...

Hi, My Brother has just bought a 1997 a4 110 tdi quattro on a P reg. I was surprised to see that he had the same Full DIS as I have on my 2001 a4 130 pd? Did this come as an option on the earlier cars? The car also has a few more odd options like the xenon globe front headlights which I...

Erm Bosch are a large company and do have a china division, you would need to look at their website like I did to see they are genuine Bosch. The Kit I bought has been faultless and my Brother bought the same Kit for his car and that has been without flaw either. My post was actually to ask if...

I fitted a bosch 6000k kit to my B6 which went in easily cost me £90 delivered. I had to take out the drivers front light and mount the bracket that comes with the ballast to a bit of the bulkhead and wrapped it up tight. The other ballast I mounted in that area inside the engine bay on the...

I have recently developed what sounds like the same fault on my B6 130 tdi. It has suddenly started to hesitate when you let off the accelerator at speed and then re-apply the power. I have definitely noticed a drop in torque above 3000rpm. I removed the MAF sensor the other day to see if I...

Hi Andy, I have just got some new speakers and decided to get a set of Alpine SXS-1757 for the front as I'm hoping that they will not need to be amplified. I just wanted to ask what the diameter of the rings of mdf that you cut for the adapter's were? Thanks for your help. regards Jonathon

Your Temp sensor on the rad might of gone, I had a similiar problem on mine and it turned out that the engine was being overcooled. Regards Jonathon

Thanks Andy, I had no idea the speakers would need such large adapters. I'm quite handy with the Mdf so will follow your design for the adapter rings. I also wasn't sure where you mean't i should place dynamat? Basically the system is completely OEM at the moment and i have a kenwood PS971R...

Hi, Can anyone tell me if these 6.5" component speakers will fit in the stock doors without an trouble? Also if anyone has any reviews on them I would be grateful as well. I think i'm right in saying that front & rears are both 6.5" ? Thanks for any help regards Jonathon

If your spending £500 then why not get the pro AMD rolling road treatment? I think they are getting at least 180hp and around 280-300lbft torque! Also they have the option to add a switch that allows you too turn if from standard to tune to modded. regards Jonathon