Recent content by jpestrada115

Hi Trups I'd like to order the above kit please. Can you send me a paypal invoice for them please. jpestrada115@yahoo.com is my paypal email address. Cheers.

Cool! I might just wait for those then order the footwells with the doors. Thanks. :salute:

Trups Can you post a pic of your upgrade LED for the footwell lights please? Thanks.

Yeah mate, I've got the light pack. The puddle lights have the OEM panel single LED with 2 tiny pins in them (similar to those in SilkyS3's pics). The red warning lights have the T10/W5W regular filament globes in them. I'm in Australia by the way (Cairns, Queensland 4870). Can you confirm...

Hi Trups Thanks for confirming. Anyway, I managed to use some of the spare panel LEDs (that I bought from you a couple of years back for my A3 8P3 - car now sold) for the glove box and boot lights in my S3 8V saloon. Thus, I will only need the LEDs for the front & rear door puddle lights and...

Hi t8ups I see from Silky_S3's thread that there are 4 LEDs in the door puddle light LED module. How many LEDs are there in the upgraded boot LED module? Hopefully more than 4 LEDs so that its brighter in the boot. Cheers.

Hi Trups I'm keen on 2 pairs of the revised ones (new order here). Question: will the new orders come with the little halogen bulbs? Obviously the new orders will not have the earlier versions that have these little halogen bulbs. Cheers.

^ Well, looks like your close to nailing it then! Looks like you will just need to do the following: Add the missing wires in your adapter (Pin 12 of the 14-connector), run these wires through the fire wall and slot the pins into A44 and C26 of the 52-pin connectors at the CEM. The table in...

^ There's a lot of information that you need to confirm for us to be able to help you out. Looks like a wiring problem. 1. Do you have the same CE module as mine (8P0 907 063A). As your car is a 2011 and mine is a 2010, yours may be different. 2. If yes to Item 1 above, have you checked that...

Yes, 10 was vacant.

Yeah mate. Well chuffed with it. Thanks for your help to sus it out.

And the proof that it works - here's a photo of the car with the DRL on (full brightness). Haven't taken pics of the other functions but they work as follows: Switch on "AUTO": Front and rear LEDs ON during daylight; headlights ON at dusk/dark with front LEDs dimmed; DRL dims when turn...

The coding that I used are as follows, everything working correctly as per factory functions including auto-lights and coming/leaving home lights and no errors on the DIS: Byte 14: Bit 3 - Bi-xenon Headlights (with Shutter) installed = ON/checked Byte 17: Bit 2 - Bi-xenon Headlights (with...

Finally done! First off, in case anyone will need them, the part numbers for the repair wires that will get the above connectors for the 4 loose wires. I.e., 1 x repair wire will get you 2 pins (1 at each end of the wire). 3x small pins: 000979150E 1x big pin: 000979151E

The adapter should have 4 loose wires that needs to be wired to the ECM. Your adapter have got 2 only so it doesn't sound right. Here's a simplified version of my spreadsheet showing the pin assignments in both the 10 and 14 pin connectors. I made the font colours the same to help trace where...