Recent content by H_audi

Ok if anyone else is stuck on this and also have a 2005 Audi A3, the grommet is on the passenger side, near the top as pictures here: Fourtitude.com - Access to the engine bay through the firewall in an 8P S3?

I've just taken the glovebox out and I don't see a gromet. Where do you run the power cable through on 2005 Audi A3? Helpp:(

Alright thanks Ash, I'll do that. Where will all the connections go? Is there a guide anywhere on installing this harness? Basically my question is, where will the 3 thin wires connect to?

Also Ash, this is a very similar one to what you suggested, but it looks liek the block on there fits iso and the red mini iso...I could be wrong and maybe am so feel free to correct me:) Connects 2 CTSAD003 - Audi A3 / A4 / TT Stalk Steering Wheel Interface Adaptor EDIT: I've been doing some...

Alright Ash, seems you know what you are talking about, so if I get this lead it would be solely based on your advise here. I just have one question for you; where would all the connections go, as all I have is the ISO and red mini ISO, as pictured in the link below. Image - TinyPic - Free...

They were cut/modified to work as plug and play didn't power up the stereo and also I paid for fitting too, which i can't get back. I think the below link seems to be the right one and it's not too expensive, but again I'm not sure so need to confirm from someone already used it. Idealy, I...

If I could do a hard wire, that would be much better right now, as I have already spent nearly £80 on cables and adapters already, so really don't want to spend any more if I can help it. if you have any links that might help with the wiring, that would be much appreciated dude.

Oh ok. So there is no simpler cable without the steering wheel bit which may be cheaper? Will this work simply as a plug and play solution?

The big block on the adapter you sent a link to, I have no where to connect that to. I also have no steering wheel control so why would you think this is the right lead? I've already spent quite a bit on the leads and fitting cost so I'm reluctant to spend any more, if there is a way to...

Thanks Ash, but I don't have the new quadlock connection or any steering wheel controls, I have the iso and red mini iso. I brought a similar one and it did not fit at all as I don't have the new quadlock connection. What about the CT20AU10, will this not work? Is there any way to modify the...

I have an 2005 audi a3 2.0tdi. I used the CT20AU09 but maybe I need the CT20AU10? Also I am thinking of instaling a sub and amp so do you think this will fix it? FYI it's a vibe active sub.

Andyam, I'm not sure if I need it and if it will fix my issue. I've used CT20AU09. which one do you have? Also i'm not sure when you will see this post because for some reason my posts aren't showing up until approved by a moderator. Mods please unblock this and let me post straight away, I...

I checked on their site and it shows it's for an Audi A4 Connects 2 Car Audio Systems, Car Stereo, Car Radio DAB Stereos, Car interface adapters and accessories > ProductInformation I've got an Audi A3 2.0 TDI 2005 plate

I searched for the same on their website and it says it's for an audi A4 Connects 2 Car Audio Systems, Car Stereo, Car Radio DAB Stereos, Car interface adapters and accessories > ProductInformation I have a 2005 Audi A3 2.0 TDI.

Thanks for the reply. The lead I brought was a connects2 CT20AU09 which is the same as the auto leads one so I just sent that link. This one difinitely needed modification. The quesion is what do I do next to resolve this issue? Is there a way I can wire this right or do I need to buy a new...