Just thought I'd post this for the sake of anyone that gets these faults and decides to use the search function:
I had rough idling - When pulling up to a stop, the revs wouldn't drop all the way down to ~800rpm, instead lingering around 1000rpm and then slowly rising to approx 1300rpm and...
Some faults are practically harmless for day to day driving whereas others need to be checked immediately.
In the absence of any other dramatic message on the DIS, I'd say (in my non-mechanic's opinion) it's safe to get it to a workshop, but wouldn't want to do too much more without at least...
Find someone with VAGCOM / VCDS and see if it finds any codes.
Apparently (and I'm going off what an Audi tech said to me), their VAS whatever systems don't report the same faults as VCDS, or require a higher frequency to appear as faults.
My VCDS showed a logged fault (about idle control RPM...
And just figured out fog lights for DRLs (instead of the proper DRL bulbs next to the bixenons)
Central Electronics
Long coding
Byte 21, bit 0-2
Change from 05 Bi-Xenon Front Light with separate Daytime Running Lights (DRL) to
04 Bi-Xenon Front Light without additional High Beam
This enables the...
Thanks, this is partially the solution... With this, front indicators both come on and stay on when the main bixenon headlights are on (and on low-beam (or whatever it's called) too)
Hello all,
I have a pre-facelift 8P S3... Was wondering how this kind of behavior can be enabled using VCDS / Vagcom:
http://i74.photobucket.com/albums/i244/kciker337/DSC_0244.jpg
Using fog lights and/or indicators as DRLs.
Have had a look around module 09 at the long coding and I can't figure...
Need access to VAGCOM / VCDS
http://wiki.ross-tech.com/wiki/index.php/Audi_Radio/Navigation_System_(RNS-E)
Change coding to 02xxxxx.
Change adaptation channel 018 to 1.
Restart the RNS-E.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.