Recent content by audi58

Oh, thanks for that. I'll have to get the exhaust clamps checked, just in case.

Seems to happen all the time although particularly when accelerating at low RPM.

Hello, Has anyone had a rattle coming from underneath the rear seat/bench before? It's driving me mad! I've had the front seats and the rear bench out but still can't find it. Seems to be more noticeable around 2,000 RPM. Any advice would be much appreciated. Thanks

Does anybody know what came as standard on the 6 cylinder models? I know that you get the exhaust pipes on either side, but what about things like servotronic? Was that standard? Looking to pick one up soon so anything to be particularly aware of too would be helpful. Thanks

You need to get an adapter and your car needs to be coded.

Hi there, I've got an issue! Time after time my car is acting kind of strange. The problem is that the car doesn’t run below 1400 rpm's while I'm driving and keep the gearbox in wrong gear (too low). And when I turn off the ignition, usually the ventilator starts to work (~15min), although...

The pin will become viable when you take your light cluster off, it will be in the corner closest to the side of the car. The are screws on the underneath of the bumper and a nut each side of the car in a hole just below where you take the screw out for the light cluster.

Haha, is was very careful! Luckily I did not. Thanks for all the info tho guys.

No worries, I had a go yesterday and managed to do it. It's very similar for the A4 however there are a couple of pins that need to be taken out near the light cluster. Thanks for your help anyway!

Could be, what's the dent?

Thanks for the advice NHN, where can you get this from and roughly how much are they? Thanks

Hi NHN, I got this one: eBay - The UK's Online Marketplace This was a connect to the reverse wire in the control module jobby.

Dave, you're a star!! This is highly appreciated.:thumbsup:

Hello, I have retrofitted the Geniune Audi Parking sensor kit, however when I reverse, the constant tone is heard when the car is about 2 foot away from something. How can I get it to reduce this, can I reset it by connecting the blue wire again? Thanks

Hi, I've bought some genuine Audi Parking Sensors, just need to fit them now. Anyone with any knowledge of this, I would greatly appreciate any advice or tips. Picture guide would be amazing or am I being too hopeful? Thanks in advance! :thumbsup: