Audi A4 Black Edition 177
Only selling as releasing money to build a property, 74000 miles, will go up as in daily use.
Bang and olufsen stereo
Flat bottom steering wheel
Glacier white paint (£550) extra when new looks amazing
Cruise control
Front and rear parking sensors
Heated...
https://www.audi-sport.net/xf/threads/diy-refurb-on-diamond-cut-rotors.387110/
Have a look at this, I have just done mine myself but you would need access to a large lathe
Thanks, I have seen videos of them being polished out by hand but that must take ages and the finish would never be as good!
Having access to a large lathe helped :) once the boss was made to hold the wheels and everything was set up the machining only takes a few minutes per wheel, the labour...
Evening All,
Been on the list of jobs to do for a while now, due to stone chips in the lacquer my rotors have suffered badly through the winter from alloy corrosion and as a result looked awful.
Rather than pay someone else I thought id have a go myself, having access to a large lathe and a...
Not sure if it is the same as the 2.0tfsi but sounds similar to a problem I had.......
Slight judder on idle and misfire on very light acceleration when passing through around 1200 RPM, after this the car felt normal and wouldn't get the misfire if you accelerated quicker through 1200RPM.
This...
Cheers for the reply, I looked into this and will post the results as I think I have a screenshot of the values, the adaption value was -1.54 at idle
Chain was replaced by Audi when the recall work was done for the oil consumption issues, mind you that was back when the car was at around 85k...
Evening all,
Looking for some advice, i have an issue with my 2009 TFSi 211
Recently it seems to have developed a rough/lumpy idle and seems to be idling at around 750RPM, am sure it used to idle at around the 800 mark.
If moving off in first gear with very little throttle input the car...
Thanks, yeah love the Misano red, Lip spoiler came was from E-bay mate, they come pre painted and you can specify the length etc
Warmed it with a heat gun to get the curve of the boot and they just stick on, very good quality and less than £30 delivered
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.