My rack is ******* and making nasty sounds. Drops all the fluid in a few hours. My friend has several MK4 Golfs. Are those steering racks compatible? I called up VW, they aren't much help.
I have this turbo i got for free. Needs renovating. I've been told it fits the stock manifold on the A3, and should be bolt on with a different inlet pipe. Not sure how much truth there is to that. I already have a K03s, with a turbo back miltek. Not sure how much of an upgrade it would...
Can't actually get my mates delphi to connect but that has been an issue for a while. Not sure why. I was just wondering if it pulls the warning light from actual sensor, or the tach which admittedly doesnt work as intended. I know it can be fixed. I just had the issue on my way home from work...
First off i should mention my A3 is facelifted and has one of those tachs where the temp and fuel gauge needle gets out of alignment. Anyways, im having some issues with the water temp warning coming on from time to time. Im assuming Its an electrical issue since when the light comes on the...
Timing belt, waterpump and thermostat. Getting that bracket which the RH engine mount sits on off was a nightmare and it wasn’t any easier getting it on either. There has to be some sort of trick to it. Raising and lowering engine didn’t help much either. Lots of fidgeting around
I've had to change the crank position sensor 3 times over the past 7 years i've owned the car. OEM sensors. Seems a bit much. Could there be any specific reason for that?
Also, the car has been parked for one and half year, with the same oil in it. Before it was parked i had just changed the...
I got the issue sorted. Seems the thread was fine. Some dumbass (me) didn't seat one of those rubber seals in cyl 1 properly and the plug was melted on there.
Wont get nowhere near 500hp. At most half of that. Will probably get a slight upgrade when the stock is worn out. Was only thinking of...
Sparkplug in cylinder 1 is stuck. No idea if it's turning or, if the sparkplug is rounded, or if the thread in the head is ******. Will remove valve cover when I have more time and have a look what is going on.
If worst comes to worst and the thread is done, then the head is pretty much done in...
One of these has come for sale a few hours from me. It's an '86, 2.2 10vt. Completely stock. They are rarely for sale anywhere remotely near me outside Germany, and on the rare occasion they are, the prices are ridiculous. Anything associated quattro i5 turbo. Call it the "Group B Tax" if you...
What actually causes this to come on? I just got home after being on the freeway. The car will randomly become jerky for a split second after getting on it WOT. The idle will be raised to around 1100 (like its on the cold start map). The car will feel slightly hesistant when cranking, but it...
Right, VCDS says:
17695 - Divertervalve for turbocharger (N249) P1287 - 35-00 - Interruption
I'm also getting a cat error, P0420 which im assuming is because of my turboback Milltek
I've translated it into english
Symptoms: The car doesn't accelerate smoothly at part throttle in the lower...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.