Recent content by and32

yes thats what I thought

yes but I think they doin tboth but then again im not sure

hello I have a 2001 s3 and it has the beginning of rust starting on the roof rail, I went to my local audi dealer to try and claim under the 12 year corrosion warranty but they said its not covered because it hasnt rusted in the way stated in their terms and conditions. so instead they said...

thanx for your help

yes agu 1999 a3, where is that located and how much is one

hello today i am driving along and i get a misfire, car has droped a cylinder so i thought coil packs, after unpluging each one i found it was cylinder 2, so to double check i swaped 1 and 2 coil packs round and it was stil cylinder 2 not working. The misfire is intermittant and will work fine...

ok thanks, on the pic i cant see if it has 8 or 12 blades it does have the silencer though

hello i need a new k03s for my car which is a 1999 a3 1.8t. Can anyone tell me if a turbo from a seat ibiza fr 1.8t is a k03s that would fit my car, from the pic ive seen it looks right, it has the silencer. The vag number is 06A145713E.

hello i have fitted the turbo and i think there is a big problem, the bearings are whinning, i did everthing properly, i primed it with oil before fitting. i dont really know wha to do

hello its andy, i just posted a question about the actuator rod, dont know if you know where it should be set. One other question, the box that it came in is a for a new k03s from borgwarner, is this just the box you got the used turbo in

hello i am about to fit a new turbo to my car, i have got a new one (second hand), it looks like the actuator arm has been adjusted, i need to know where it should be set to. The car is a k03s conversion with custom code stage 2 and all bolt ons.

hello i need help now, My turbo is on its way out, there is a lot of oil in the intercooler pipes and there is quite a bit of end float on the turbo shaft, it is a k03s turbo. There is a used one for sale on ebay its from a leon cupra 180hp, but i am not sure if its a k03s. The part number is...

is there anything that could cause exess oil in the tip

well it has, the maf wasnt covered but it was definatly contaminated, you can see its comeing in from the breather, maybe i could get a catch tank instead of sending it back through the turbo

hello i posted earlier about a boost issue, i think ive found the problem, i took the maf off and cleaned it with injector cleaner and reset the ecu. this cured the problem car goes like stink now. I now have noticed there is quite a bit of oil in the tip and boost pipes, i shon a torch down tip...