Recent content by khan_1212

.

got the bi-xenon wired up and working. only thing was when i pull the high beam stalk forward the bi-xenon shutters dont work as high beam but instead the the bulb closer to the grill turns on as high beam. would this be due to coding? if so does anyone have the right coding for bi-xenon with...

this is a picture of connector A. how do i find out which pin is 3 & 5? ImageShack® - Online Photo and Video Hosting

Help needed. Ive taken out connector A but how do i locate pin 3 and 5? there seems to be wires already in those pins? do i take any exsiting wires outfrom the connector and replace them with kufatec wires??

yep just clarifying it. would you have the coding for the bi-xenon to work properly?

kool, so i need to connect all 4 wires to the connectors? regardless of using DRL's??

ok i want high beam shutters. would i also need to connect the DRL'S wires if i wanted CH/LH activated??

Any help to where the Kufatec adapter wires go on the CE connector/pins would be much appreciated???

Just wondering if this feature can work on my A3 2007 (07). I had halogen lights fitted as standard on the car but i put in bi-xenon with the Kufatec adapter where the loose cables from that adapter get connected to the CE. Now is it still possible for CH/LH lights to work on the bi-xenon...

i'll be selling the car before the mot runs out and when i sell the car the bi-xenon will come out and the normal halogen lights will go back in :-) would you have any piks or info about where the wiring goes? which connector/pins? thanks

Thanks for that NHN. Can i ask you where do the 4 loose wires on Kufatec adapter connect to in CE? Which adapter/pins? I wont be using auto-levelling so do i connect all 4 wires or just 2 of them?

Thanks. I'll have a go at it later on

Thanks for yor reply and pikz. Much appreciated. How do i remove the whole wiper arm so that i can take off the scuttle panel?

My car came as standard halogen headlights. I have installed bi-xenon headlights with Kufatec adapter in my A3 2007. I have to feed the wires throught the firewall. Can anyone tell me the best location to feed the wires through? Any pictures with be a great help Thanks

Is it possible to choose which lights turn on when CH/LH is activated.. eg, sidelights and fog lights only or sidelights only etc. My car is a 2007 A3 tdi