The system is easy to remove one exhaust sensor two clamps just behind the dpf and 4 rubber hangers then the lot drops down. I used a 1mm thin cthing blade on a 4" angle grinder to reassemble I used a bead
I live in Australia and had trouble finding 2 ohm speakers so I used 4 ohm they are 6&1/2 inch.the 4 ohm are a bit quieter, 2 ohm are freely available in the UK & US more to come
you will find the speakers in the rear mufflers are shot they are only 2 ohms i replaced the speakers and all is good again, you have to cut the top off the speaker part to replace.
Hi i made a couple of small hooks out of an old coat hanger put one in each side of the grille and pulled straight forward, it helps if the weather is warm leave it in the sun for a while.
hope this helps
cheers Rob.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.