Need exhaust tip ideas for a diesel cabriolet

[dhillon884]

Hi,

I have a b6 cabriolet diesel, and the orignial rear valance has no cut outs for exhausts... i swapped the rear bumper with one from a petrol so now have cut outs for exhausts... i was looking for someone to point me in the direction of the exhaust tips like the ones the b7 cabriolet diesels have?? are they available to buy (cost?)

any other ideas... if theres nothing reasonable, i may just put the original valance back on....

 

[markyzs180]

hi

here the link to my thread when i had mine changed on my diesel cab, i had new rear boxes as well but you can have just the tips changed for around 50 quid each depending on which one you go for. do a google for powerflow and have a look

http://http://www.audi-sport.net/vb...ls-and-exhaust-fitted-(pic-heavy!)&highlight=

 

[dhillon884]

thanks... getting new ones sound pricey esp since this isn't a mod I wanted, just being forced into because i changed the rear bumper....

Do the exhaust tips from a B7 diesel (cab or saloon) come off so they can be attached to mine, if so, i'll look for a b7 diesel breaking...???

 

[scott b]

http://www.pipewerx.com/

 

[Woorlord]

Powerflow dealers will weld on new tips - there are numerous choices - check out their >>Website<<.

This is what I did >>My example here<<

My original B6 OEM tips were crimp fitted and then spot welded in a couple of places so not really reuseable - I still have them in my garage!

 

[CMD]

I have a A4 b6 190t exhaust stock s-line with twin outlet's. I'm having my s/steel cat and exhaust fitted this Sat 29th, so the stock item will be ready for collection.

 

[markyzs180]

thanks... getting new ones sound pricey esp since this isn't a mod I wanted, just being forced into because i changed the rear bumper....

Do the exhaust tips from a B7 diesel (cab or saloon) come off so they can be attached to mine, if so, i'll look for a b7 diesel breaking...???

I've got the old plain rear valance off mine (with no exhaust cut outs) its only a couple of screws and a few clips to swap them over, pm me if you want it

 

[dhillon884]

Thanks guys...

Think i'll go with Woorlord's advice and get some tips and have them welded on... hopefully can get hold of some nice looking tips for cheap.... I would ideally want ones which point downwards though, so still looks like a diesel... if not then anything goes...