Another RR/ Dyno Problem *Power graphs att*

djarchive

Registered User
Joined
Apr 28, 2009
Messages
295
Reaction score
9
Points
18
Location
Preston
:tocktock:

Ok here's a good one. Couple of points to consider 1st.

-Its drives fine on the road, no hick ups or Engine warning lights.

-Been on vag-com and everythings peachy.



***

powervstorque.png
http://img514.imageshack.us/i/powervstorque.png/


http://img709.imageshack.us/i/lmbavsbhp.png/


http://img197.imageshack.us/i/barvspower.png/

***



In short- At a glance *what do these graphs tell you? :readit:

(Other then I need a K04 hybrid or GT30 conv?) :thumbsup:



*RR not preloaded correctly? Dyno not accurate? 4 wheel drive/ Helix kicking in to hault power? Torque misreading/impossible? A magic car? :think: :sos:





Again, Your help is much appr.

Joe :icon_thumright:
 
Suggests the haldex wasn't disconnected but good power on a DD Dyno...

The dips are the haldex kicking in, boost looks fine, fuelling looks fine....

Looks like the dyno was set up ok too...

IMO of course...

<tuffty/>
 
looks like dyno dynamics, as reputable as it gets

Hmmm.


Looks like the usual DD not liking Haldex type plot..
some serious boost spike there.. good luck with your rods.
fueling is spot on.. but I would be nervous of the torque and boost spike personally.

remember Wellys bend rod?
 
Last edited:
...some serious boost spike there.. good luck with your rods.
fueling is spot on.. but I would be nervous of the torque and boost spike personally.

remember Wellys bend rod?

Good spot there mate... didn't notice that while fighting a slow RDP connection displaying the images... looking at the power vs torque plot you are making 330ftlbs torque!!!!!

I concur... I pray for your rods if that is at all accurate... the boost reading will be at least which is heading for a 1.7bar spike... ouch!

<tuffty/>
 
Christ 1.7bar spike?? I know fudge all about graphs, relative to the gents above, but even I know that's high for a car like ours :S
 
I blame Custom Code / JBS whoever the hell they trade as for the aggresive map.

Nothing gone bang yet (Touches head)

The car,

Phase 2 map uploaded, along with a Helix organic clutch, full Miltek system inc sports cat + 3" D.P @ Pipeworx. A PiperX panel filter, T.I.P. and AH Fab intercooler with lower pipes replaced to silcone stiffness.





I too, pray for my rods :( :(


Would the graph seem possible using a K04?

"They" whoever they are, say that the K04 isn't possible of making such power / torque.


Correct me if i'm wrong!? :detective2:
 
Last edited: