My S3 ran a bearing lastnite :(

Dhaafier

Registered User
Joined
Mar 4, 2010
Messages
7
Reaction score
0
Points
1
Hi All
Is this common?
The oil pump and turbo was replaced not to long ago. The car had a major service done about 3 weeks ago. I was using Magnatex oil before i used shell.
Any comments.
Stripping tonight.
 
Hi All
Is this common?
The oil pump and turbo was replaced not to long ago. The car had a major service done about 3 weeks ago. I was using Magnatex oil before i used shell.
Any comments.
Stripping tonight.

I wouldn't of called it common mate, no to be honest.

What sort of noise did it make?
 
I wouldn't of called it common mate, no to be honest.

What sort of noise did it make?

Oil pressure light came on. I switch off. Drove again light came back on and heard i rumble and then a really loud rumble like a diesel engine lol...
What bearings you guys recommend?
 
I used Audi bearings for mine... just make sure whatever you use are tanged as tang less bearings can spin on the journals...

<tuffty/>
 
I used Audi bearings for mine... just make sure whatever you use are tanged as tang less bearings can spin on the journals...

<tuffty/>

Are you talking about the lip to hold the bearing
 
CRAP. id do a lot of searching find out what caused the oil pressure issue.

any clues so far?
 

Similar threads